TC7MPB9326FK集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

The TC7MPB9326 and TC7MPB9327 are CMOS dual

multiplexer/demultiplexer bus switches that can provide an interface

between two nodes at different voltage levels. These devices can be

connected to two independent power supplies. VCCA supports 1.8 V,

2.5 V and 3.3 V power supplies, whereas VCCB supports 2.5 V, 3.3 V

and 5.0 V power supplies.

Bidirectional level-shifting is possible by simply adding external

pull-up resistors between the A/Bn data lines and the VCCA / VCCB

supplies. There is no restriction on the relative magnitude of the A

and Bn voltages; both the 1A/2A and 1B1/1B2 ,2B1/2B2 data lines

can be pulled up to the arbitrary power supplies.

The Output Enable pin (OE) can be used to disable the device so

that the bus lines are effectively isolated.

This device consists of dual individual two-inputs

multiplexer/demultiplexer with a common select input (S) and an

output enable (OE:TC7MPB9326, OE :TC7MPB9327). The 1A/2A

inputs are connected to 1B1/1B2 and 2B1/2B2 outputs based on the

combination of select input and output enable.

For TC7MPB9326, it has an active high Output Enable (OE) :

When OE is High, the switch is on; when Low, the switch is turned

off. For the TC7MPB9327, it has an active low Output Enable (OE ) :

WhenOE is Low, the switch is turned on; whenOE is High, the

switch is off.

The TC7MPB9326 and TC7MPB9327 supports power-down

protection at the OE , OE input, with OE , OE being 5.5 V tolerant.

The channels consist of n-type MOSFETs.

All the inputs provide protection against electrostatic discharge.

特性 Features

• Operating voltage:1.8 V to 2.5 V, 1.8 V to 3.3 V, 1.8 V to 5.0 V, 2.5 V to 3.3 V, 2.5 V to 5.0 V or 3.3 V to 5.0 V

bidirectional interface

• Operating voltage: VCCA = 1.65 to 5.0 V, VCCB = 2.3 to 5.5 V

• Low ON-resistance: RON = 5.0 Ω (typ.)@ VIS = 0 V, IIS = 30 mA, VCCA= 3.0 V , VCCB = 4.5 V

• ESD performance: Machine model ≥ ±200 V

Human body model ≥ ±2000 V

• 5.5 V tolerance and power-down protection at the Output Enable input.

• Packages: TSSOP14, VSSOP14(US14)