100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION The TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted

文件：122.28 Kbytes 页数：8 Pages

TELCOM

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

Microchip

微芯科技

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION The TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted

文件：122.28 Kbytes 页数：8 Pages

TELCOM

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION The TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted

文件：122.28 Kbytes 页数：8 Pages

TELCOM

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION The TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted

文件：122.28 Kbytes 页数：8 Pages

TELCOM

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION The TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted

文件：122.28 Kbytes 页数：8 Pages

TELCOM

100mA CHARGE PUMP DC-TO-DC VOLTAGE CONVERTER

GENERAL DESCRIPTION\nThe TC660 DC-to-DC voltage converter generates a negative voltage supply, that can support a 100mA maximum load, from a positive voltage input of 1.5V to 5.5V. Only two external capacitors are required. Power supply voltage is stored on an undedicated capacitor then inverted and ■ Pin Compatible with TC7660\n■ High Output Current ..................................... 100mA\n■ Converts (+1.5V to 5.5V) to (– 1.5V to – 5.5V)\n■ Power Efficiency @100mA......................... 88% typ\n■ Low Power Consumption ................200µA @ 5 VIN\n■ Low Cost and Easy to Use\n— Only;

Microchip

微芯科技