SY10H350数据手册集成电路（IC）的转换器电平移位器规格书PDF

描述 Description

The SY10H350 consists of 4 translators with differential inputs and TTL outputs. The 3-state outputs can be disabled by applying a HIGH TTL logic level on the common OE input. The SY10H350 is designed to be used primarily in systems incorporating both ECL and TTL logic operating off a common power supply. The separate VCCpower pins are not connected internally and thus isolate the noisy TTL VCC runs from the relatively quiet ECL VCCruns on the printed circuit board. The differential inputs allow the H350 to be used as an inverting or noninverting translator, or a differential line receiver. The H350 can also drive CMOS with the addition of a pullup resistor.

特性 Features

·Single 5V power supply
·3.5ns propagation delay typical
·Fully compatible with MC10H350
·Available in 20-pin PLCC package
·

简介

SY10H350属于集成电路（IC）的转换器电平移位器。由制造生产的SY10H350转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。