IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo

Features • L6362A IO-Link device transceiver main characteristics: – IO-Link PHY layer – Dedicated overload diagnostics pin – UART interface – Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator – Overload and overheating protections with non-dissipative cut-off function – Full reverse p

文件：3.24734 Mbytes 页数：5 Pages

STMICROELECTRONICS

意法半导体

VOLTAGE REGULATOR

文件：103.13 Kbytes 页数：3 Pages

SSDI

Rotameter (Float-type flow meter)

If a medium with sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated element is raised so far, and the equilibrium between the lift strength of the medium itself and the weight of the floated element is adjusted. Since the average flow ra

文件：625.33 Kbytes 页数：11 Pages

BURKERT

宝帝流体控制系统

USING KEELOQ짰 TO GENERATE HOPPING PASSWORDS

INTRODUCTION The purpose of this application note is to demonstrate how KEELOQ® code hopping technology can be conveniently employed to implement an automatic code hopping password generator/keypad. Using a PIC12C508, the hopping code produced by an HCS300 is converted to a string of 16 hex

文件：158.78 Kbytes 页数：17 Pages

MICROCHIP

微芯科技