STSPIN32F0B

配备嵌入式STM32 MCU的高级单电阻BLDC控制器; • Extended operating voltage from 6.7 to 45 V \n• Three-phase gate drivers \n •600 mA sink/source \n •Integrated bootstrap diodes \n •Cross-conduction prevention \n• 32-bit ARM® Cortex®-M0 core: \n •Up to 48 MHz clock frequency \n •4-kByte SRAM with HW parity \n •32-kByte Flash memory with option bytes used for write/readout protection \n •Bootloader FW available \n• 3.3. V DC/DC buck converter regulator with overcurrent, short-circuit, and thermal protection \n• 12 V LDO linear regulator with thermal protection \n• 20 general-purpose I/O ports (GPIO) \n• 5 general-purpose timers \n• 12-bit ADC converter (up to 9 channels)• I2C, USART and SPI interfaces \n• One rail-to-rail operational amplifier for signal conditioning \n• Comparator for overcurrent protection with programmable threshold \n• Standby mode for low power consumption \n• UVLO protection on each power supply: \n •V\nM, V\nDD, V\nREG and V\nBOOTx \n• On-chip debug support via SWD \n• Extended temperature range: -40 to +125 °C;

The STSPIN32F0B is a System-In-Package providing an integrated solution suitable for driving three-phase brushless motors using different driving modes.\n\nIt embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function.\n\n An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the MCU and external components. An internal LDO linear regulator provides the supply voltage for gate drivers. The integrated operational amplifier is available for the signal conditioning, e.g. the current sensing across the shunt resistor.\n\n A comparator with a programmable threshold is integrated to perform the overcurrent protection.\n\n The integrated MCU (STM32F031C6 with extended temperature range, suffix 7 version) allows performing fieldoriented control, the 6-step sensorless and other advanced driving algorithms. It has the write-protection and read-protection feature for the embedded Flash memory to protect against unwanted writing and/or reading. It is possible to download the firmware on-the-field through the serial interface thanks to the embedded bootloader.\n\n The STSPIN32F0B device also features overtemperature and undervoltage lockout protections and can be put in the standby mode to reduce the power consumption. The device provides 20 general-purpose I/O ports (GPIO) with the 5 V tolerant capability, one 12-bit analog-to-digital converter with up to 9 channels performing conversions in a single-shot or scan modes, 5 synchronizable general-purpose timers and supports an easy to use debugging serial interface (SWD). \n\n

STSPIN32F0B

Six-step brushless motor driver evaluation board for applications based on the STSPIN32F0B BLDC controller

STSPIN32F0B

Compact reference design for low voltage brushless power tools based on STSPIN32F0B

STSPIN32F0B

Package：48-VFQFN 裸露焊盘；包装：托盘 类别：集成电路（IC） 应用特定微控制器 描述：ADVANCED SINGLE SHUNT BLDC CONTR

STSPIN32F0BTR

Package：48-VFQFN 裸露焊盘；包装：托盘 类别：集成电路（IC） 应用特定微控制器 描述：ADVANCED SINGLE SHUNT BLDC CONTR

STM32F0

MigratingbetweenSTM32F1andSTM32F0seriesmicrocontrollers

STM32F0DISCOVERY

STM32developmentboards

STM32F0DISCOVERY

STM32F051R8T6microcontrollerfeaturing64KBFlash

STM32F0DISCOVERY

DiscoverykitforSTM32F0microcontrollers

STSPIN32F0

Three-phasegatedrivers