STPRDC02

High performance high voltage full-bridge driver

Features •60Vfull-bridgedriverforN-ChannelMOSFETs •Adjustabledead-timecontrol •2Asink/sourcecurrent •Operatingfrequencyupto1MHz •Enableinput •Programmableovercurrent-protection •VFQFPN,4x4mmpackage Description TheSTPRDC02isa60V,high-voltage,full-bridge

STPRDC02

高性能高压; • 60 V full-bridge driver for N-Channel MOSFETs \n• Adjustable dead-time control \n• 2 A sink/source current \n• Operating frequency up to 1 MHz \n• Enable input \n• Programmable overcurrent-protection \n• VFQFPN, 4x4 mm package;

The STPRDC02 is a 60 V, high-voltage, full-bridge MOSFET driver IC to implement a control scheme specific to primary-side in STVCOT™-based resonant / non-resonant converters. It provides four high-current gate drive outputs, each capable of driving one or more N-channel Power MOSFETs.\n\n The device features programmable dead-time control to optimize MOSFETs switching and reduce losses in order to optimize the overall efficiency.\n\nTwo PWM inputs control the two half-bridge sections independently. EN pin, when low, forces all the gate drive to low regardless of the PWMs status implementing an HiZ.\n\nOvercurrent protection is programmable and senses through a common shunt resistance to be connected in series to the Low-Side power MOSFETs.\n\n The STPRDC02 is available in VFQFPN, 4x4 mm package with exposed pad.\n\n

STPRDC02A

High-voltage full-bridge driver with high impedance management and ZVD output; • 60V full-bridge driver for N-channel MOSFETS \n• Adjustable deadtime control \n• High impedance management for STBuck applications \n• Zero voltage detection output \n• 2 A sink/source current \n• Enable input \n• VFQFPN, 4x4 mm package;

The STPRDC02A is a 60 V, high-voltage, full-bridge MOSFET driver IC that can drive two independent half-bridges. It provides four high-current gate driver outputs, each capable of driving one or more N-channel power MOSFETS.\n\n The device is configurable and optimizes the driving scheme of the STBuck topology to improve power density.\n\n The zero voltage detection output allows to optimize STC application and to compensate for component tolerances improving the overall cost of the application.\n\n Two PWM inputs control the two half-bridge sections independently. EN pin low, forces all the gate drives low regardless of the PWMs, thus implementing a HiZ.\n\n The STPRDC02A is available in VFQFPN, 4x4 mm package with exposed pad.\n\n

STPRDC02A

High-voltage full-bridge driver with high impedance management and ZVD output

Features •60Vfull-bridgedriverforN-channelMOSFETS •Adjustabledeadtimecontrol •HighimpedancemanagementforSTBuckapplications •Zerovoltagedetectionoutput •2Asink/sourcecurrent •Enableinput •VFQFPN,4x4mmpackage Description TheSTPRDC02Aisa60V,high-voltage,