STNRG288A数据手册集成电路（IC）的电源管理-专用规格书PDF

描述 Description

STNRG devices are a part of the STNRG family of STMicroelectronics® digital devices designed for advanced power conversion applications.
The STNRG improves the design of the successful STLUX™ family, now integrated in a wide range of LED driver architectures, to support industrial power conversion applications such as PFC+LLC, interleaved LC DC/DC, interleaved PFC for smart power supplies as well as the full bridge for pilot line drivers for electric vehicles.

特性 Features

• Up to 6 programmable PWM generators (SMED - “State Machine Event Driven”)
• 10 ns event detection and reaction
• Max.1.3 ns PWM resolution
• Single, coupled and two coupled operational modes
• Up to 3 internal/external events per SMED
• 4 analog comparators
• 4 internal 4-bit references
• Up to 4 external references
• Less than 50 ns propagation time
• Continuous comparison cycle
• Configurable hysteresis voltage levels
• ADCs (up to 8 channels)
• 10-bit precision, with operational amplifier to extend resolution to 12-bit equivalent
• Sequencer functionality
• Input impedance: 1 MΩ
• Configurable gain value: x1 and x4
• Integrated microcontroller
• Advanced STM8® core with Harvard architecture and 3-stage pipeline
• Max. fCPU: 16 MHz
• Memories
• Flash and E2PROM with read while write (RWW) and error correction code (ECC)
• Program memory: 32 Kbytes Flash; data retention 15 years at 85 °C after 10 kcycles at 25 °C
• Data memory: 1 Kbyte true data E2PROM; data retention:15 years at 85 °C after 100 kcycles at 85 °C
• RAM: 6 Kbytes
• Clock management
• Internal 96 MHz PLL
• Low power oscillator circuit for external crystal resonator or direct clock input
• Internal, user-trimmable 16 MHz RC and low power 153.6 kHz RC oscillators
• Clock security system with clock monitor
• Basic peripherals
• System, auxiliary and basic timers
• IWDG/WWDG watchdog, AWU, ITC
• Reset and supply management
• Multiple low power modes (wait, slow, auto- wakeup, Halt) with user definable clock gating
• Low consumption power-on and power- down reset
• I/O
• Multifunction bidirectional GPIO with highly robust design, immune against current injection
• Fast digital input DIGIN, with configurable pull-up
• Communication interfaces
• UART asynchronous with SW flow control and bootloader support
• I2C master/slave fast-slow speed rate
• Operating temperature: -40 °C up to 105 °C.

简介

STNRG288A属于集成电路（IC）的电源管理-专用。由制造生产的STNRG288A电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。