STM8TL53C4中文资料8位超低功耗触摸感应MCU，具有16-KB Flash和接近探测功能数据手册ST规格书

描述 Description

The STM8TL52x4 and STM8TL53x4 devices feature the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations. It uses a ProxSense charge transfer capacitive acquisition method that is capable of near range proximity detection.

The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming. All STM8TL52x4 and STM8TL53x4 microcontrollers feature low-power low-voltage single-supply program Flash memory.

The STM8TL52x4 and STM8TL53x4 devices are based on a generic set of state-of-the-art peripherals. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

特性 Features

• Operating conditions
•Operating power supply: 1.65 V to 3.6 V
•Temperature range: –40 °C to 85 °C
• Low power features
•4 low power modes: Wait, Active-halt with AWU (1 μA), Active-halt with ProxSense™ (10 μA with scan every 200 ms),Halt (0.4 μA)
•Dynamic power consumption: 150 μA/MHz
•Fast wakeup from Halt mode: 4.7 μs
•Ultra-low leakage per I/O: 50 nA
• Advanced STM8 Core
•Harvard architecture with 3-stage pipeline
•Max freq.16 MHz,16 CISC MIPS peak
• Memories
•Up to 16 Kbyte of Flash program including up to 2 Kbyte of data EEPROM
•Error correction code (ECC)
•Flexible write and read protection modes
•In-application and in-circuit programming
•Data EEPROM capability
•4 Kbyte of static RAM
• Clock management
•Internal 16 MHz factory-trimmed RC
•Internal 38 kHz low consumption RC driving both the IWDG and the AWU
• Reset and supply management
•Ultra-low-power, ultra safe power-on reset/ power-down reset
• Interrupt management
•Nested interrupt controller with software priority control
•Up to 22 external interrupt sources
• I/Os
•Up to 23 with 22 mappable on external interrupt vectors
•I/Os with programmable input pull-ups, high sink/source capability
• ProxSense™ patented acquisition technology with up to 300 touch sensing channels (20 receiver/transmitter channels and 15 transmitter channels) supporting projected capacitive acquisition method suitable for proximity detection.
• 计时器
•Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and two channels (used as IC, OC, PWM)
•One 8-bit timer (TIM4) with 7-bit prescaler
•Independent watchdog
•Window watchdog
•Auto-wakeup unit
•Beeper timer with 1, 2 or 4 kHz frequencies
• Communication interfaces
•SPI synchronous serial interface
•Fast I2C Multimaster/slave 400 kHz
•USART with fractional baud rate generator
• Development support
•Hardware single wire interface module (SWIM)
•In-circuit emulation (ICE)