STM8S207S6数据手册ST中文资料规格书

描述 Description

The STM8S20xxx performance line 8-bit microcontrollers offer from 32 to 128 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual.

All STM8S20xxx devices provide the following benefits: reduced system cost, performance robustness, short development cycles, and product longevity.

The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system.

Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools.

Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply.

特性 Features

• 内核
•Max fCPU: up to 24 MHz, 0 wait states @ fCPU≤ 16 MHz
•Advanced STM8 core with Harvard architecture and 3-stage pipeline
•Extended instruction set
•Max 20 MIPS @ 24 MHz
• Memories
•Program: up to 128 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles
•Data: up to 2 Kbytes true data EEPROM; endurance 300 kcycles
•RAM: up to 6 Kbytes
• Clock, reset and supply management
•2.95 to 5.5 V operating voltage
•Low power crystal resonator oscillator
•External clock input
•Internal, user-trimmable 16 MHz RC
•Internal low power 128 kHz RC
•Clock security system with clock monitor
•Wait, active-halt, & halt low power modes
•Peripheral clocks switched off individually
•Permanently active, low consumption power-on and power-down reset
• Interrupt management
•Nested interrupt controller with 32 interrupts
•Up to 37 external interrupts on 6 vectors
• 计时器
•2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
•Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
•8-bit basic timer with 8-bit prescaler
•Auto wakeup timer
•Window watchdog, independent watchdog
• Communications interfaces
•High speed 1 Mbit/s active beCAN 2.0B
•UART with clock output for synchronous operation - LIN master mode
•UART with LIN 2.1 compliant, master/slave modes and automatic resynchronization
•SPI interface up to 10 Mbit/s
•I2C interface up to 400 Kbit/s
• 10-bit ADC with up to 16 channels
• I/Os
•Up to 68 I/Os on an 80-pin package including 18 high sink outputs
•Highly robust I/O design, immune against current injection
•Development support
•Single wire interface module (SWIM) and debug module (DM)
• 96-bit unique ID key for each device