STM8S903F3数据手册ST中文资料规格书

描述 Description

The STM8S903K3/F3 access line 8-bit microcontrollers offer 8 Kbyte Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost.

Device performance and robustness are ensured by advanced core and peripherals made in a state-of-the art technology, a 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog and brown-out reset.

Full documentation is offered as well as a wide choice of development tools.

特性 Features

• 内核
•16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
•Extended instruction set
• Memories
•Program memory: 8 Kbyte Flash; data retention 20 years at 55 °C after 10 kcycle
•Data memory: 640 byte true data EEPROM; endurance 300 kcycle
•RAM: 1 Kbyte
• Clock, reset and supply management
•2.95 to 5.5 V operating voltage
•Flexible clock control, 4 master clock sources
• Low power crystal resonator oscillator
• External clock input
• Internal, user-trimmable 16 MHz RC
• Internal low-power 128 kHz RC

•Clock security system with clock monitor
•Power management:
• Low-power modes (wait, active-halt, halt)
• Switch-off peripheral clocks individually

•Permanently active, low-consumption power-on and power-down reset
• Interrupt management
•Nested interrupt controller with 32 interrupts
•Up to 28 external interrupts on 7 vectors
• 计时器
•Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
•16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
•8-bit basic timer with 8-bit prescaler
•Auto wake-up timer
•Window watchdog and independent watchdog timers
• Communication interfaces
•UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode
•SPI interface up to 8 Mbit/s
•I2C interface up to 400 kbit/s
• Analog to digital converter (ADC)
•10-bit, ±1 LSB ADC with up to 7 multiplexed channels + 1 internal channel, scan mode and analog watchdog
•Internal reference voltage measurement
• I/Os
•Up to 28 I/Os on a 32-pin package including 21 high sink outputs
•Highly robust I/O design, immune against current injection
• Unique ID
•96-bit unique key for each device