STM32U031K8数据手册ST中文资料规格书

描述 Description

The STM32U031x4/6/8 devices are ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at a frequency of up to 56 MHz.

The STM32U031x4/6/8 devices embed high-speed memories (up to 64-Kbyte flash memory and 12-Kbyte SRAM with hardware parity check), and an extensive range of enhanced I/Os and peripherals connected to APB and AHB buses, and a 32-bit multi-AHB bus matrix.

They also embed protection mechanisms for embedded flash memory and SRAM, such as readout protection and write protection.

The STM32U031x4/6/8 devices offer a 12-bit ADC, a 12-bit DAC, an embedded rail-to-rail analog comparator, one operational amplifier, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, three general-purpose 16-bit timers, and two 16-bit low-power timers

The devices also embed up to 21 capacitive sensing channels.

They also feature standard and advanced communication interfaces, namely three I2Cs, two SPIs, four USARTs and two low-power UARTs.

The STM32U031x4/6/8 operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V VDD power supply using an internal LDO regulator. A comprehensive set of power-saving modes makes possible the design of low-power applications.

Independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparator, as well as VBAT input allowing the backup of the RTC and backup registers.

The STM32U031x4/6/8 offer eight packages from 20 to 64 pins.

特性 Features

• Includes ST state-of-the-art patented technology.
• Ultra-low-power features (ultra-low-power devices)
•1.71 V to 3.6 V power supply
•-40 °C to 85/125 °C temperature range
•VBAT mode: 130 nA (with RTC and 9 x 32-bit backup registers)
•Shutdown mode (4 wake-up pins): 16 nA
•Standby mode (4 wake-up pins): 160 nA with RTC, 30 nA without RTC
•Stop 2 mode: 630 nA with RTC, 515 nA without RTC
•Run mode (LDO mode): 52 μA/MHz
•Batch acquisition mode (BAM)
•4 μs wake-up from Stop mode
•Brownout reset (BOR)
• 内核
•32-bit Arm® Cortex®-M0+ CPU, frequency up to 56 MHz
• ART Accelerator
•1-Kbyte instruction cache allowing 0-wait-state execution from flash memory
• Benchmarks
•1.13 DMIPS/MHz (Drystone 2.1)
•134 CoreMark® (2.4 CoreMark/MHz at 56 MHz)
•430 ULPMark™-CP
•167 ULPMark™-PP
•20.3 ULPMark™-CM
• Memories
•Up to 64-Kbyte single bank flash memory, proprietary code readout protection
•12-Kbyte SRAM with hardware parity check
• Rich analog peripherals (independent supply)
•1x 12-bit ADC (0.4 µs conversion time), up to 16-bit with hardware oversampling
•1x 12-bit DAC output channel, low-power sample and hold
•1x general-purpose operational amplifier with built-in PGA (variable gain up to 16)
•1x ultra-low-power comparator
• General-purpose inputs/outputs
•Up to 53 fast I/Os, most of them 5 V‑tolerant
• 16 communication interfaces
•6x USARTs/LPUARTs (SPI, ISO 7816, LIN, IrDA, modem)
•3x I2C interfaces supporting Fast-mode and Fast-mode Plus (up to 1 Mbit/s)
•2x SPIs, plus 4x USARTs in SPI mode
•IRTIM (Infrared interface)
• 安保
•Customer code protection
•Robust read out protection (RDP): 3 protection level states and password-based regression (128-bit PSWD)
•Hardware protection feature (HDP)
•Secure boot
•True random number generation, candidate for NIST SP 800-90B certification
•Candidate for Arm® PSA level 1 and SESIP level 3 certifications
•5 passive anti-tamper pins
•96-bit unique ID
• Clock management
•4 to 48 MHz crystal oscillator
•32 kHz crystal oscillator for RTC (LSE)
•Internal 16 MHz factory-trimmed RC (±1%)
•Internal low-power 32 kHz RC (±5%)
•Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
•PLL for system clock, ADC
• 9 timers, RTC, and 2 watchdogs
•1x 16-bit advanced motor-control, 1x 32-bit and 3x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer
•RTC with hardware calendar, alarms and calibration
• CRC calculation unit
• Up to 18 capacitive sensing channels
•Supporting touchkey, linear and rotary touch sensors
• 7-channel DMA controller
•Flexible mapping (DMAMUX)
• Debug
•Development support: serial wire debug (SWD)
• All packages are ECOPACK2 compliant.