SST39VF1601C集成电路（IC）的存储器规格书PDF中文资料

Product Description

The SST39VF1601C and SST39VF1602C devices are 1M x16 CMOS Multi-Purpose Flash Plus (MPF+) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST39VF160xC writes (Program or Erase) with a 2.7-3.6V power supply. These devices conform to JEDEC standard pinouts for x16 memories.

Featuring high performance Word-Program, the SST39VF1601C/1602C devices provide a typical Word-Program time of 7 µsec. These devices use Toggle Bit, Data# Polling, or the RY/BY# pin to indi cate the completion of Program operation. To protect against inadvertent write, they have on-chip hard ware and Software Data Protection schemes. Designed, manufactured, and tested for a wide spectrum of applications, these devices are offered with a guaranteed typical endurance of 100,000 cycles. Data retention is rated at greater than 100 years.

Features

• Organized as 1M x16: SST39VF1601C/1602C

• Single Voltage Read and Write Operations

– 2.7-3.6V

• Superior Reliability

– Endurance: 100,000 Cycles (Typical)

– Greater than 100 years Data Retention

• Low Power Consumption (typical values at 5 MHz)

– Active Current: 9 mA (typical)

– Standby Current: 3 µA (typical)

– Auto Low Power Mode: 3 µA (typical)

• Hardware Block-Protection/WP# Input Pin

– Top Block-Protection (top 8 KWord)

– Bottom Block-Protection (bottom 8 KWord)

• Sector-Erase Capability

– Uniform 2 KWord sectors

• Block-Erase Capability

– Flexible block architecture; one 8-, two 4-, one 16-, and thirty one 32-KWord blocks

• Chip-Erase Capability

• Erase-Suspend/Erase-Resume Capabilities

• Hardware Reset Pin (RST#)

• Latched Address and Data

• Security-ID Feature

– SST: 128 bits; User: 128 words

• Fast Read Access Time:

– 70 ns

• Fast Erase and Word-Program:

– Sector-Erase Time: 18 ms (typical)

– Block-Erase Time: 18 ms (typical)

– Chip-Erase Time: 40 ms (typical)

– Word-Program Time: 7 µs (typical)

• Automatic Write Timing

– Internal VPP Generation

• End-of-Write Detection

– Toggle Bits

– Data# Polling

– Ready/Busy# Pin

• CMOS I/O Compatibility

• JEDEC Standard

– Flash EEPROM Pinouts and command sets

• Packages Available

– 48-lead TSOP (12mm x 20mm)

– 48-ball TFBGA (6mm x 8mm)

– 48-ball WFBGA (4mm x 6mm)

• All devices are RoHS compliant