Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

文件：290.1 Kbytes 页数：13 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

文件：459.55 Kbytes 页数：14 Pages

TI

德州仪器

双路正边沿触发式 D 型触发器

This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is • Available in the Texas Instruments NanoFree Package\n• Inputs Accept Voltages to 5.5 V\n• Low Power Consumption, 10-μA Max ICC \n• Typical VOLP (Output Ground Bounce) CC = 3.3 V, TA = 25°C\n• Ioff Feature Supports Live Insertion, Partial-Power-Down Mode Operation and Back Drive Protection\n• ESD ;

TI

德州仪器

丝印：2WT5；Package：SSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

丝印：2WT5；Package：SSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

丝印：C79J；Package：VSSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

丝印：C79J；Package：VSSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

丝印：C79R；Package：VSSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器

丝印：C79R；Package：VSSOP；Dual Positive-Edge-Triggered D-Type Flip-Flop

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：690.34 Kbytes 页数：22 Pages

TI

德州仪器