OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

文件：866.97 Kbytes 页数：23 Pages

TI

德州仪器

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

文件：601.21 Kbytes 页数：19 Pages

TI

德州仪器

具有三态输出的八路总线收发器

These octal bus transceivers are designed for 1.65-V to 3.6-V VCC operation. The ’LVC245A devices are designed for asynchronous communication between data buses.\n • Operates From 1.65 V to 3.6 V\n• Max tpd of 6.3 ns at 3.3 V\n• Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C\n• Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC)\n• ESD Protection Exceeds JESD 22\n• 1000-V Charged-Device Model;

TI

德州仪器

具有三态输出的增强型产品八路总线收发器

This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.\n The SN74LVC245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) • Controlled Baseline \n• Enhanced Diminishing Manufacturing Sources (DMS) Support\n• Qualification Pedigree\n• Inputs Accept Voltages to 5.5 V\n• Typical VOLP (Output Ground Bounce) CC = 3.3 V, TA = 25°C\n• Ioff Supports Partial-Power-Down Mode Operation\n• Latch-Up Performance Exceeds 250 mA Per J;

TI

德州仪器

Package：20-SSOP（0.209"，5.30mm 宽）；包装：卷带（TR） 类别：集成电路（IC） 缓冲器，驱动器，接收器，收发器 描述：IC TXRX NON-INVERT 3.6V 20SSOP

TI

德州仪器

Package：20-SSOP（0.209"，5.30mm 宽）；包装：卷带（TR） 类别：集成电路（IC） 缓冲器，驱动器，接收器，收发器 描述：IC TXRX NON-INVERT 3.6V 20SSOP

TI

德州仪器

Package：20-TFSOP（0.173"，4.40mm 宽）；包装：管件 类别：集成电路（IC） 缓冲器，驱动器，接收器，收发器 描述：IC TXRX NON-INVERT 3.6V 20TVSOP

TI

德州仪器