SN74LV8T541 Octal Buffers and Drivers with 3-State Outputs and Logic-Level Shifter

1 Features • Wide operating range of 1.65V to 5.5V • 5.5V tolerant input pins • Single-supply voltage translator (refer to LVxT Enhanced Input Voltage): – Up translation: • 1.2V to 1.8V • 1.5V to 2.5V • 1.8V to 3.3V • 3.3V to 5.0V – Down translation: • 5.0V, 3.3V, 2.5V to 1.8V • 5.0V,

文件：1.86345 Mbytes 页数：31 Pages

TI

德州仪器

具有三态输出的 8 位固定方向电平转换器（增强型产品）

The SN74LV8T541-EP contains eight buffers with 3-state outputs. The active low output enable pins (OE1 and OE2) control all eight channels, and are configured so that both must be low for the outputs to be active. When the outputs are enabled, the outputs are actively driven low or high. When the ou Wide operating range of 1.65V to 5.5V\n \n5.5V tolerant input pins\n \nSingle-supply voltage translator (refer to LVxT Enhanced Input Voltage): \n \nUp translation: \n \n1.2V to 1.8V\n \n1.5V to 2.5V\n \n1.8V to 3.3V\n \n3.3V to 5.0V\n \n\n \n Down translation: \n \n5.0V, 3.3V, 2.5V to 1.8V\n \n5.0V;

TI

德州仪器

具有三态输出的汽车级八位固定方向电平转换器

该输入经设计，具有较低阈值电路，支持电源电压大于输入电压时的升压转换。此外，当输入电压大于电源电压时，5V 容限输入引脚可实现降压转换。输出电平始终以电源电压 (VCC) 为基准，并支持 1.8V、2.5V、3.3V 和 5V CMOS 电平。 符合面向汽车应用的 AEC-Q100 标准： \n \n器件温度等级 1：-40°C 至 +125°C\n \n器件 HBM ESD 分类等级 2\n \n器件 CDM ESD 分类等级 C4B\n \n\n \n1.65V 至 5.5V 的宽工作电压范围\n \n5.5V 容限输入引脚\n \n单电源电压转换器（参阅 LVxT 增强输入电压）： \n \n升压转换： \n \n1.2V 至 1.8V\n \n1.5V 至 2.5V\n \n1.8V 至 3.3V\n \n3.3V 至 5.0V\n \n\n \n 降压转换： \n \n5.0V、3.3V、2.5V 至 1.8V\n \n5.;

TI

德州仪器