SN74AUP2G241YFPR集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

SN74AUP2G241YFPR属于集成电路（IC）的缓冲器驱动器接收器收发器。由德州仪器制造生产的SN74AUP2G241YFPR缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

1FEATURES

• Available in the Texas Instruments NanoStar™

Package

• Low Static-Power Consumption

(ICC = 0.9 mA Maximum)

• Low Dynamic-Power Consumption

(Cpd = 4.2 pF Typ at 3.3 V)

• Low Input Capacitance (Ci = 1.5 pF Typical)

• Low Noise – Overshoot and Undershoot

<10% of VCC

• Ioff Supports Partial-Power-Down Mode

Operation

• Wide Operating VCC Range of 0.8 V to 3.6 V

• Optimized for 3.3-V Operation

• 3.6-V I/O Tolerant to Support Mixed-Mode

Signal Operation

• tpd = 9.9 ns Maximum at 3.3 V

• Suitable for Point-to-Point Applications

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

The AUP family is TI's premier solution to the industry's low-power needs in battery-powered portable

applications. This family ensures a very low static- and dynamic-power consumption across the entire VCC range

of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains excellent signal

integrity (see the very low undershoot and overshoot characteristics shown in Figure 2).

The SN74AUP2G241 is designed specifically to improve both the performance and density of 3-state

memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the

package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.