SN74ALVCH162244中文资料具有总线保持和三态输出的 16 通道、1.65V 至 3.6V 缓冲器数据手册TI规格书

描述 Description

This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation.

The SN74ALVCH162244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE)\\ inputs. The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot. To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN74ALVCH162244 is characterized for operation from –40°C to 85°C.

特性 Features

• Member of the Texas Instruments Widebus™ Family
• Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages
NOTE: For tape-and-reel order entry, the DGGR package is abbreviated to GR. Widebus, EPIC are trademarks of Texas Instruments.