SN65LBC176-Q1中文资料汽车类差动总线收发器数据手册TI规格书

描述 Description

The SN65LBC176 differential bus transceiver is a monolithic, integrated circuit designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI Standard RS-485 and ISO 8482:1987(E).

The SN65LBC176 combines a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications. Very low device supply current can be achieved by disabling the driver and the receiver. Both the driver and receiver are available as cells in the Texas Instruments LinASIC™ Library.

This transceiver is suitable for ANSI Standard RS-485 and ISO 8482:1987 (E) applications to the extent that they are specified in the operating conditions and characteristics section of this data sheet. Certain limits contained in the ANSI Standard RS-485 and ISO 8482:1987 (E) are not met or cannot be tested over the entire extended temperature range.

特性 Features

• Qualified for Automotive Applications
• Meet or Exceed the Requirements of ANSI Standard RS-485 and ISO 8482:1987(E)
• Designed for High-Speed Operation in Both Serial and Parallel Applications
• Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
• Wide Positive and Negative Input/Output Bus Voltage Ranges
• Thermal-Shutdown Protection
• Open-Circuit Fail-Safe Receiver Design
• Receiver Input Hysteresis . . . 50 mV Typ
• Glitch-Free Power-Up and Power-Down Protection
LinBiCMOS and LinASIC are trademarks of Texas Instruments Incorporated.