SN54ABT245A中文资料具有三态输出的八路总线收发器数据手册TI规格书

描述 Description

These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

特性 Features

• Typical VOLP (Output Ground Bounce)    CC = 5 V, TA = 25°C
• High-Drive Outputs (–32-mA IOH, 64-mA IOL)
• ESD Protection Exceeds JESD 22
• 200-V Machine Model (A115-A)