Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.

文件：519.58 Kbytes 页数：9 Pages

YAGEO

国巨

丝印：MX；Package：DO-214AA；600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 600W Peak Pulse Power Dissipation • 5.0V to 200V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (No

文件：81.37 Kbytes 页数：3 Pages

DIODES

美台半导体

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Supressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

文件：255.38 Kbytes 页数：4 Pages

LITTELFUSE

力特

Transient Voltage Suppression Diodes

文件：144.9 Kbytes 页数：5 Pages

LITTELFUSE

力特

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 440 Volts 600 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

文件：92.16 Kbytes 页数：3 Pages

MDE

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts TRANSIENT VOLTAGE SUPPRESSOR DIODE Operating Teperature: -55°c to 150°c

文件：55.63 Kbytes 页数：1 Pages

RFE

RFE international

SMBJ / SMCJ Series Surface Mount Voltage Suppressors

Features • For surface mounted applications in order to optimise board space • Low profile package • Built-in strain relief • Glass passivated junction • Excellent clamping capability • Low inductance • Typical ID less than 1μA above 10V

文件：929.68 Kbytes 页数：4 Pages

MULTICOMP

易络盟

Transient Voltage Suppression Diodes Surface Mount

Features: • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle ):0.01% • Very fast response time • Low incremental surge resistance •

文件：373.11 Kbytes 页数：3 Pages

MULTICOMP

易络盟

SMBJ / 1.5SMCJ Series Surface Mount Voltage Suppressors

Features: • For surface mounted applications in order to optimise board space • Low profile package • Built-in strain relief • Glass passivated junction • Excellent clamping capability • Low inductance • Repetition Rate (duty cycle) : 0.05% (1.5SMCJ) 0.01% (SMBJ) • Fast Response Ti

文件：1.03494 Mbytes 页数：5 Pages

MULTICOMP

易络盟

Surface Mount Transient Voltage Suppressor

Features ◇ For surface mounted application ◇ Low profile package ◇ Built-in strain relief ◇ Glass passivated junction ◇ Excellent clamping capability ◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min ◇ Typical IR less than 1uA above 10V ◇ High temperature soldering guar

文件：99.18 Kbytes 页数：4 Pages

TSC

台湾半导体