Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt

Features ● For surface mount applications in order to optimize board space ● Low profile package ● Fast response time: typical less than 1.0ps from 0 volts to VBR minimum ● Low inductance ● Excellent clamping capability

文件：410.45 Kbytes 页数：5 Pages

MCC

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 440 Volts 600 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

文件：92.16 Kbytes 页数：3 Pages

MDE

丝印：BE；1-Line ESD Protection

Description SMBJXXCA are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection i

文件：537.25 Kbytes 页数：7 Pages

SEMTECH

先之科

SMBJ / SMCJ Series Surface Mount Voltage Suppressors

Features • For surface mounted applications in order to optimise board space • Low profile package • Built-in strain relief • Glass passivated junction • Excellent clamping capability • Low inductance • Typical ID less than 1μA above 10V

文件：929.68 Kbytes 页数：4 Pages

MULTICOMP

易络盟

SMBJ / 1.5SMCJ Series Surface Mount Voltage Suppressors

Features: • For surface mounted applications in order to optimise board space • Low profile package • Built-in strain relief • Glass passivated junction • Excellent clamping capability • Low inductance • Repetition Rate (duty cycle) : 0.05% (1.5SMCJ) 0.01% (SMBJ) • Fast Response Ti

文件：1.03494 Mbytes 页数：5 Pages

MULTICOMP

易络盟

600W Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 5.0 To 170 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

文件：214.91 Kbytes 页数：4 Pages

WEITRON

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ● Fast resp

文件：116.25 Kbytes 页数：4 Pages

HY

虹扬科技

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

PEAK PULSE POWER 600 WATTS REVERSE VOLTAGE 6.8 to 520 Volts FEATURES • Glass passivated chip • 600W peak pulse power capability woth a 10/1000μs waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast respon

文件：130.24 Kbytes 页数：2 Pages

PACELEADER

霈峰

600W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260°C / 10 seconds at

文件：422.66 Kbytes 页数：4 Pages

SECOS

喜可士

丝印：17CA；Package：DO-214AA；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast

文件：874.38 Kbytes 页数：7 Pages

SY

顺烨电子