SKY66013-11数据手册RF/IF射频/中频RFID的射频放大器规格书PDF

描述 Description

Please note: SKY66013-11 is being discontinued and is not recommended for new designs.

The SKY66013-11 linear Power Amplifier (PA) is a fully matchedsurface mount module developed for WCDMA applicationsoperating from 700 to 800 MHz. The device meets the stringentspectral linearity requirements of WCDMA femtocell applicationswith high power-added efficiency. An integrated directionalcoupler eliminates the need for any external coupler.

The GaAs MMIC contains all active amplifier circuitry, whichincludes input and interstage matching circuits. An output matchinto a 50 Ω load, realized off-chip within the module package,optimizes efficiency and power performance.

The SKY66013-11 is manufactured with Skyworks InGaP GaAsHBT process, which provides for all positive voltage DC supplyoperation and maintains high efficiency and good linearity. Theprimary bias to the device can be supplied directly from anysuitable power supply with an output of 4.2 V. Power down isachieved by setting the VEN pin to 0 V. No external supply sideswitch is needed since typical “off” leakage is a few microampswith full primary voltage supplied from the main power supply.

The SKY66013-11 is packaged in a 10-pin, 3 x 3 mm Multi-ChipModule (MCM), which allows for a highly manufacturable low-costsolution.

特性 Features

• Small signal gain: 27.5 dB
• ACLR at POUT = +19 dBm: –51 dBc
• PA on/off control
• I/O impedance internally matched to 50 Ω
• Single DC supply: 3.3 V to 4.6 V
• Minimal number of external components required
• Small footprint MCM (10-pin, 3 x 3 mm) package (MSL3, 260 C per JEDEC J-STD-020)

简介

SKY66013-11属于RF/IF射频/中频RFID的射频放大器。由制造生产的SKY66013-11射频放大器在射频应用中，射频放大器产品可用于信号增益和缓冲。这些产品与通用运算放大器的不同之处在于，它们通常适用于更高的频率，更倾向于提供不可调节的固定增益，并且输入或输出阻抗值符合常用传输线特性阻抗。