SKY66005-11数据手册RF/IF射频/中频RFID的射频放大器规格书PDF

描述 Description

The SKY66005-11 linear Power Amplifier (PA) is a fully matched surface mount module developed for WCDMA applications operating from 850 to 920 MHz. The device meets the stringent spectral linearity requirements of WCDMA femtocell applications with high power-added efficiency. An integrated directional coupler eliminates the need for any external coupler.

The GaAs MMIC contains all active amplifier circuitry, which includes input and interstage matching circuits. An output match into a 50 Ω load, realized off-chip within the module package, optimizes efficiency and power performance.

The SKY66005-11 is manufactured with Skyworks InGaP GaAs HBT process, which provides for all positive voltage DC supply operation and maintains high efficiency and good linearity. The primary bias to the device can be supplied directly from any suitable power supply with an output of 4.2 V. Power down is achieved by setting the VEN pin to 0 V. No external supply side switch is needed since typical “off” leakage is a few microamps with full primary voltage supplied from the main power supply.

The SKY66005-11 is packaged in a 10-pin, 3 x 3 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution.

特性 Features

• Small signal gain: 30 dB
• ACLR at POUT = +19 dBm: –51 dBc
• PA on/off control
• I/O impedance internally matched to 50 Ω
• Single DC supply: 3.3 V to 4.6 V
• Minimal number of external components required
• Small footprint MCM (10-pin, 3 x 3 mm) package (MSL3, 260 °C per JEDEC J-STD-020)

应用 Application

• Small Cells

简介

SKY66005-11属于RF/IF射频/中频RFID的射频放大器。由制造生产的SKY66005-11射频放大器在射频应用中，射频放大器产品可用于信号增益和缓冲。这些产品与通用运算放大器的不同之处在于，它们通常适用于更高的频率，更倾向于提供不可调节的固定增益，并且输入或输出阻抗值符合常用传输线特性阻抗。