3-phase bridge rectifier brake chopper 3-phase bridge inverter

Features • One screw mounting module • Fully compatible with SEMITOP® 1,2,3 • Improved thermal performance by aluminium oxide substrate • Trench IGBT technology • CAL technology free-wheeling diode • Integrated NTC temperature sensor Typical Applications* • Inverter up 12,5 kVA • Typical

文件：860.48 Kbytes 页数：4 Pages

Semikron

赛米控丹佛斯

IGBT module

Features* • One screw mounting module • Solder free mounting with Press-Fit terminals • Fully compatible with other SEMITOP® Press-Fit types • Improved thermal performances by aluminium oxide substrate • 650V Trench 5 IGBT (S5) • CAL4F technology FWD • Low inductive design • Integrated

文件：674.8 Kbytes 页数：7 Pages

Semikron

赛米控丹佛斯

Differential Receiver with Variable Output Swing

Description The SK10/100EL16V is a differential receiver with variable output swing. Its VCTRL input controls the amplitude of the Q and Q* outputs. The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2. Simple control of the output swin

文件：146.43 Kbytes 页数：9 Pages

SEMTECH

先之科

Differential Receiver with Variable Output Swing

Description The SK10/100EL16V is a differential receiver with variable output swing. Its VCTRL input controls the amplitude of the Q and Q* outputs. The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2. Simple control of the output swin

文件：146.43 Kbytes 页数：9 Pages

SEMTECH

先之科

Differential Receiver with Variable Output Swing

Description The SK10/100EL16V is a differential receiver with variable output swing. Its VCTRL input controls the amplitude of the Q and Q* outputs. The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2. Simple control of the output swin

文件：146.43 Kbytes 页数：9 Pages

SEMTECH

先之科

Differential Receiver with Variable Output Swing

Description The SK10/100EL16V is a differential receiver with variable output swing. Its VCTRL input controls the amplitude of the Q and Q* outputs. The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2. Simple control of the output swin

文件：146.43 Kbytes 页数：9 Pages

SEMTECH

先之科

Differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator

Description The SK10/100ELT21W is a single differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator. Since PECL (Positive ECL) levels are used, only +VCC and ground are required. The small outline, 8 lead SOIC package, low skew, and the single gate design of the SK10/100ELT21W makes it

文件：80.32 Kbytes 页数：5 Pages

SEMTECH

先之科

Differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator

Description The SK10/100ELT21W is a single differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator. Since PECL (Positive ECL) levels are used, only +VCC and ground are required. The small outline, 8 lead SOIC package, low skew, and the single gate design of the SK10/100ELT21W makes it

文件：80.32 Kbytes 页数：5 Pages

SEMTECH

先之科

Differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator

Description The SK10/100ELT21W is a single differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator. Since PECL (Positive ECL) levels are used, only +VCC and ground are required. The small outline, 8 lead SOIC package, low skew, and the single gate design of the SK10/100ELT21W makes it

文件：80.32 Kbytes 页数：5 Pages

SEMTECH

先之科

Differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator

Description The SK10/100ELT21W is a single differential PECL to CMOS/TTL or LVPECL to LVCMOS/LVTTL Translator. Since PECL (Positive ECL) levels are used, only +VCC and ground are required. The small outline, 8 lead SOIC package, low skew, and the single gate design of the SK10/100ELT21W makes it

文件：80.32 Kbytes 页数：5 Pages

SEMTECH

先之科