Power Distribution Switch

The SGM2581 is a single channel power distribution switch. The switch operates from a wide range of 2.5V to 5.5V supply voltage, and is controlled by the EN pin. It can be used in USB power distribution applications.\n\n A 100mΩ low RON N-MOSFET is integrated. The small size and quiescent curre • Input Voltage Range: 2.5V to 5.5V\n• On-Resistance: 100mΩ (TYP)\n• Current Limit Level: 1100 ± 110mA\n• Quiescent Current: 23μA (TYP)\n• Shutdown Current: 0.1μA (TYP)\n• Full Set of ProtectionsSoft-StartUnder-Voltage Lockout for VINNo Reversed Leakage CurrentThermal Shutdown\n• Quick Output Discha;

SGMICRO

圣邦股份

Control circuit for SMPS

CONTROL CIRCUIT FOR SMPS The TDA2581 is a monolithic integrated circuit for controlling switched-mode power supplies (SMPS) which are provided with the drive for the horizontal deflection stage.

文件：341.42 Kbytes 页数：7 Pages

PHI

飞利浦

Control circuit for SMPS

CONTROL CIRCUIT FOR SMPS The TDA2581 is a monolithic integrated circuit for controlling switched-mode power supplies (SMPS) which are provided with the drive for the horizontal deflection stage.

文件：341.42 Kbytes 页数：7 Pages

PHI

飞利浦

36V, 10MHz, 8V/μs Op Amps

Features ⚫ Supply Voltage: 3V to 36V, or ±1.5V to ±18 V ⚫ Differential Input Voltage Range to Supply Rail ⚫ Input Rail to –VS, Rail to Rail Output ⚫ Fast Response: 10 MHz Bandwidth, 8V/μs Slew Rate, 100ns Overload Recovery ⚫ Low Offset Voltage: ±3mV Maximum at 25°C, ±3.5mV Maximum at -40°C

文件：1.33581 Mbytes 页数：18 Pages

3PEAK

思瑞浦