Power Distribution Switch

The SGM2581 is a single channel power distribution switch. The switch operates from a wide range of 2.5V to 5.5V supply voltage, and is controlled by the EN pin. It can be used in USB power distribution applications. \n\nA 100mΩ low RON N-MOSFET is integrated. The small size and quiescent current ma • Input Voltage Range: 2.5V to 5.5V \n• On-Resistance: 100mΩ (TYP) \n• Three Current Limit Levels \n• • • • SGM2581A/B/G: 1100 ± 110mA \n• SGM2581C/D/I: 2100 ± 220mA \n• SGM2581E/F/K: 2600 ± 310mA;

SGMICRO

圣邦股份

Power Distribution Switch

The SGM2581 is an integrated 100mΩ (TYP) power switch for self-powered and bus-powered universal series bus (USB) applications.\n\n The SGM2581 is internally current limited and has thermal shutdown that protects device and load from over-current damage. Thermal shutdown shuts off the output MO • 100mΩ (TYP) High-side N-Channel MOSFET\n• Three Current Limit Levels  SGM2581C/D/I: 2100 ± 220mA\n• Input Voltage Range: 2.5V to 5.5V\n• Quiescent Current: 23μA (TYP)\n• Shutdown Current: 0.1μA (TYP)\n• Soft-Start Function\n• Thermal Shutdown Protection\n• Under-Voltage Lockout Protection for VIN\;

SGMICRO

圣邦股份

Power Distribution Switch

The SGM2581 is an integrated 100mΩ (TYP) power switch for self-powered and bus-powered universal series bus (USB) applications.\n\n The SGM2581 is internally current limited and has thermal shutdown that protects device and load from over-current damage. Thermal shutdown shuts off the output MO • Input Voltage Range: 2.5V to 5.5V\n• On-Resistance: 100mΩ (TYP)\n• Current Limit Level: 2100 ± 220mA\n• Quiescent Current: 23μA (TYP)\n• Shutdown Current: 0.1μA (TYP)\n• Full Set of ProtectionsSoft-StartUnder-Voltage Lockout for VINNo Reversed Leakage CurrentThermal Shutdown\n• Quick Output Discha;

SGMICRO

圣邦股份

Control circuit for SMPS

CONTROL CIRCUIT FOR SMPS The TDA2581 is a monolithic integrated circuit for controlling switched-mode power supplies (SMPS) which are provided with the drive for the horizontal deflection stage.

文件：341.42 Kbytes 页数：7 Pages

PHI

PHI

Control circuit for SMPS

CONTROL CIRCUIT FOR SMPS The TDA2581 is a monolithic integrated circuit for controlling switched-mode power supplies (SMPS) which are provided with the drive for the horizontal deflection stage.

文件：341.42 Kbytes 页数：7 Pages

PHI

PHI

36V, 10MHz, 8V/μs Op Amps

Features ⚫ Supply Voltage: 3V to 36V, or ±1.5V to ±18 V ⚫ Differential Input Voltage Range to Supply Rail ⚫ Input Rail to –VS, Rail to Rail Output ⚫ Fast Response: 10 MHz Bandwidth, 8V/μs Slew Rate, 100ns Overload Recovery ⚫ Low Offset Voltage: ±3mV Maximum at 25°C, ±3.5mV Maximum at -40°C

文件：1.33581 Mbytes 页数：18 Pages

3PEAK

思瑞浦