SGM25701A中文资料Positive High-Voltage Hot Swap and Inrush Current Controller with Power-Limiting数据手册SGMICRO规格书

描述 Description

The SGM25701A is a positive hot swap controller that allows a board to be safely inserted or removed from a live backplane. Inrush current control function can effectively reduce the voltage drop on the power supply rail.

The SGM25701A offers programmable power-limiting and current limit to ensure that the external MOSFET operates within its safe operating area (SOA) at all times.

The chip has a good output indication function when the output voltage increases to within the 1.4V range of the input voltage.

Programmable under-voltage lockout or over-voltage lockout is used to turn off the device if the VIN drops below or raises over a threshold value. The initial insertion delay time and fault detection time can also be adjusted by the user.

When a fault is detected, the device will go into auto-retry mode.

SGM25701A is available in a Green MSOP-10 package.

特性 Features

• Wide Input Voltage Range: 9V to 70V
• Inrush Current Limit, PCB can be Safely Inserted into Live Equipment
• External Device Programming Maximum Loss Limit
• Programmable Current Limit
• Adjustable Under-Voltage Lockout (EN/UVLO)
• Adjustable Over-Voltage Lockout (OVLO)
• Open-Drain for Good Output Indication
• Quick Cut-Off Function when Severe Over-Current Occurs
• Configure Charge Pump and Gate Driver for External N-MOSFET
• The Setting of the Insertion Time Allowing the Ringing and Transient Recovery Process after the System Connected
• Adjustable Fault Timing to Prevent False Shutdown
• Retry Behavior after Fault: Auto-Retry
• Available in a Green MSOP-10 Package

应用 Application

• 24V/48V Industrial Systems
• Server Backplane Systems
• Solid State Circuit Breaker
• Base Station Power Distribution Systems