SGM2567中文资料5.5V, 4A, 15mΩ R_ON Load Switch with Reverse Current Protection数据手册SGMICRO规格书

描述 Description

The SGM2567 is a single load switch with reverse current protection function. The device can operate from 1V to 5.5V single supply and has the ability to drive up to 4A continuous current.

The device contains a 15mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.

The device supports a wide input voltage range, which is suitable for many different voltage rails. The rise time is used to avoid inrush current. The SGM2567 offers the quick output discharge function in disable status.

The SGM2567 is available in a Green WLCSP-1.45×0.95-6B package.

特性 Features

• Input Voltage Range: 1V to 5.5V
• Maximum Continuous Current: 4A
• Low On-ResistanceRON = 15mΩ at VIN = 5VRON = 15mΩ at VIN = 3.3V
• Low Shutdown Current: 170nA (TYP)
• Reverse Current Protection When Disabled
• Low Threshold 1.8V GPIO Control Input
• Bidirectional Power Supply for Power Zone Application
• Controlled Slew Rate to Avoid Inrush Current
• Over-Temperature Protection
• Quick Output Discharge
• Available in a Green WLCSP-1.45×0.95-6B Package

应用 Application

Smartphone
Notebook Computer and Ultrabook
Optical Module
Solid State Drive (SSD)
DTV/IP Set Top Box
POS Terminal and Media Gateway