SEK002数据手册开发板套件编程器的评估板-传感器规格书PDF

描述 Description

Evaluates the ABP Series (digital versions only) and MPR Series Board Mount Pressure Sensors; Honeywell HumidIcon™ Digital Humidity/Temperature Sensors: HIH6100 Series, HIH6000 Series, HIH7000 Series, HIH8000 Series, HIH9000 Series; HPM Series Particle Sensors.The SEK002 has sockets and solder pads to receive the following compatible sensors. All sensors are sold separately. Only one sensor may be evaluated at a time.

·ABP Series Basic Board Mount Pressure Sensors
·High accuracy, compensated/amplified, liquid media capable
·Digital output versions only
·DIP, SMT, leadless SMT packages: SPI, I2C output
·60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi

·MPR Series MicroPressure Board Mount Pressure Sensors
·Compact, high accuracy, compensated/amplified
·Leadless SMT packages: SPI, I2C (leadless SMT mounted on breakout board)
·±40 mbar to ±2.5 bar | ±4 kPa to ±250 kPa | ±0.6 psi to ±30 psi

·HumidIcon Digital Humidity/Temperature Sensors
·Series:
·HIH6000 Series: ±4.5 %RH accuracy, ±0.5°C temperature accuracy
·HIH6100 Series: ±4.0 %RH accuracy, ±0.5°C temperature accuracy
·HIH7000 Series: ±3.0 %RH accuracy, ±0.5°C temperature accuracy
·HIH8000 Series: ±2.0 %RH accuracy, ±0.5°C temperature accuracy
·HIH9000 Series: ±1.7 %RH accuracy, ±0.3°C temperature accuracy

·SOIC-8 packages: SPI, I2C output
·SIP packages: I2C output

·HPM Series Particle Sensors
·UART output
·A specialized Honeywell cable (32332297-001) is required

The SEK002 board is then plugged in as a shield board to the user-provided Arduino™ Uno Rev3 board. Jumpers allow the user to select the sensor to be used, supply voltage and interface (I2C, UART or SPI).

特性 Features

·Quicker, easier sensor evaluation: The SEK002 and associated Honeywell software simplify sensor evaluation and demonstration by eliminating the need for the customer to develop any code before seeing sensor measurements.
·Remote mounting: In addition to being mounted on the SEK002, the sensor may also be mounted remotely if, for example, it is to be mounted in an oven for testing or in a prototype product for proof-of-concept testing of the customer end product.
·Cost-effective: Provides a cost-effective way learn about the capabilities of our sensors so customers can make better informed component decisions faster. Customers are then able to perform a thorough evaluation of the sensor without needing to develop additional code.
·Expedites development: As the SEK002 allows customers to test their product, this helps customers to expedite their development process.

应用 Application

·Sensor demonstration
·Sensor testing and evaluation
·Proof of concept testing