LOW VF S URFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features Plastic package has Underwriters Laboratory Flammability classification 94V-0 Utilizing Fame Retardant Epoxy Molding Compound For surface mount applications Low leakage current.

文件：1.17752 Mbytes 页数：3 Pages

SY

顺烨电子

1.0 Amp Schottky Barrier Rectifiers

Voltage Range 20 to 100 Volts Current 1.0 Amperes Features ◇ Low forward voltage ◇ Extremely Low thermal resistance ◇ High Current Capability ◇ For surface mount application ◇ Higher temp soldering: 260OC for 10 seconds at terminals

文件：44.57 Kbytes 页数：2 Pages

TSC

台湾半导体

Infrared Sensors Line Guide

FEATURES REFLECTIVE SENSORS HOA1395. Features: Side-looking plastic package • Phototransistor output • Infrared emitter and phototransistor detector in a single package • Low profile for design flexibility • Designed for short-distance detection • Enhanced sensitivity • Unfocused for sensi

文件：1.0255 Mbytes 页数：18 Pages

Honeywell

霍尼韦尔

Switching Regulators

Introduction/Basic Operation In switching regulator applications the inductor is used as an energy storage device. When the semiconductor switch is on the current in the inductor ramps up and energy is stored. When the switch turns off energy is released into the load. The amount of energy stored

文件：372.98 Kbytes 页数：4 Pages

COOPER

Switching Regulators

Introduction/Basic Operation In switching regulator applications the inductor is used as an energy storage device. When the semiconductor switch is on the current in the inductor ramps up and energy is stored. When the switch turns off energy is released into the load. The amount of energy stored

文件：372.98 Kbytes 页数：4 Pages

COOPER

Switching Regulators

Introduction/Basic Operation In switching regulator applications the inductor is used as an energy storage device. When the semiconductor switch is on the current in the inductor ramps up and energy is stored. When the switch turns off energy is released into the load. The amount of energy stored

文件：372.98 Kbytes 页数：4 Pages

COOPER

Infrared Sensors Line Guide

FEATURES REFLECTIVE SENSORS HOA1395. Features: Side-looking plastic package • Phototransistor output • Infrared emitter and phototransistor detector in a single package • Low profile for design flexibility • Designed for short-distance detection • Enhanced sensitivity • Unfocused for sensi

文件：1.0255 Mbytes 页数：18 Pages

Honeywell

霍尼韦尔

RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS

DESCRIPTION The SD1411 is a silicon NPN transistor designed for telecommunications in HF and VHF frequency bands. This device utilizes gold metallized die with diffused emitter resistors to achieve high reliability and ruggedness. ■ 30 MHz ■ 40 VOLTS ■ IMD −30 dB ■ COMMON EMITTER ■ GOLD META

文件：52.72 Kbytes 页数：3 Pages

STMICROELECTRONICS

意法半导体

NPN SILICON RF POWER TRANSISTOR

DESCRIPTION: The ASI SD1414 is Designed for FM Land Mobile Applications up to 836 MHz. FEATURES: • Internal Input Matching Network • PG = 5.0 dB at 45 W/836 MHz • Omnigold™ Metalization System

文件：34.78 Kbytes 页数：1 Pages

ASI

RF & MICROWAVE TRANSISTORS 800-900 MHz APPLICATIONS

DESCRIPTION The SD1414 is a 12.5 V Class C epitaxial silicon NPN planar transistor designed for amplifier applications in the 806 - 866 MHz frequency range. Internal input matching and common base configuration assure optimum gain and efficiency across the entire frequency band. The SD1414 withst

文件：62.89 Kbytes 页数：5 Pages

STMICROELECTRONICS

意法半导体