Octal UART for 3.3V and 5V supply voltage

FUNCTIONAL DESCRIPTION The SC28L198 is composed of several functional blocks: • Synchronous host interface block • A timing block consisting of a common baud rate generator making 22 industry standard baud rates and 2 16–bit counters used for non–standard baud rate generation • 4 identical ind

文件：345.34 Kbytes 页数：56 Pages

PHI

飞利浦

Octal UART for 3.3V and 5V supply voltage

FUNCTIONAL DESCRIPTION The SC28L198 is composed of several functional blocks: • Synchronous host interface block • A timing block consisting of a common baud rate generator making 22 industry standard baud rates and 2 16–bit counters used for non–standard baud rate generation • 4 identical ind

文件：345.34 Kbytes 页数：56 Pages

PHI

飞利浦

Octal UART for 3.3V and 5V supply voltage

FUNCTIONAL DESCRIPTION The SC28L198 is composed of several functional blocks: • Synchronous host interface block • A timing block consisting of a common baud rate generator making 22 industry standard baud rates and 2 16–bit counters used for non–standard baud rate generation • 4 identical ind

文件：345.34 Kbytes 页数：56 Pages

PHI

飞利浦

Octal UART for 3.3 V and 5 V supply voltage

The Philips 28L198 Octal UART is a single chip CMOS-LSI communications device that provides 8 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the wake up mode. Synchrono Single 3.3V and 5V power supply\nEight Philips industry standard full duplex UART channels\nSixteen byte receiver FIFOs for each UART\nSixteen byte transmit FIFOs for each UART\nIn band flow control using programmable Xon/Xoff characters\nFlow control using CTSN RTSN hardware handshaking\nAutomatic ;

恩XP

恩智浦

Octal UART for 3.3 V and 5 V supply voltage

The Philips 28L198 Octal UART is a single chip CMOS-LSI communications device that provides 8 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the wake up mode. Synchrono Single 3.3V and 5V power supply\nEight Philips industry standard full duplex UART channels\nSixteen byte receiver FIFOs for each UART\nSixteen byte transmit FIFOs for each UART\nIn band flow control using programmable Xon/Xoff characters\nFlow control using CTSN RTSN hardware handshaking\nAutomatic ;

恩XP

恩智浦