FREQUENCY MIXERS

NOTES: _ x Average of conversion loss at center of mid-band frequency (fL+fU /4) σ Standard deviation o Non-hermetic t When ordering, specify BNC or SMA connectors. * L=50-100 MHz; M=100-500 MHz ** Below 10 MHz IF, conversion loss increase up to 6 dB higher as frequency decreases to DC. **

文件：74.04 Kbytes 页数：2 Pages

MINI

FREQUENCY MIXERS

Frequency Mixers LEVEL 7 500 Hz to 4.3 GHz

文件：141.5 Kbytes 页数：2 Pages

MINI

FREQUENCY MIXERS

NOTES: _ x Average of conversion loss at center of mid-band frequency (fL+fU /4) σ Standard deviation o Non-hermetic t When ordering, specify BNC or SMA connectors. * L=50-100 MHz; M=100-500 MHz ** Below 10 MHz IF, conversion loss increase up to 6 dB higher as frequency decreases to DC. **

文件：74.04 Kbytes 页数：2 Pages

MINI

Frequency Mixer

文件：228.6 Kbytes 页数：2 Pages

MINI

Frequency Mixer

文件：228.6 Kbytes 页数：2 Pages

MINI

Frequency Mixer

文件：252.46 Kbytes 页数：2 Pages

MINI

Frequency Mixer

文件：252.46 Kbytes 页数：2 Pages

MINI

DBL BAL MIX / RoHS

·More mixer models that meet more needs than all other mixer manufacturers combined from 500 Hz to 20 GHz!\n·LO power levels from 3 to 27 dBm\n·Excellent unit-to-unit matching\n·Hermetically sealed LTCC packages\n·Lowest cost models in the industry

Mini-Circuits

D-Band Low Noise Amplifier

SBL-1141741365-0606-E1 is a D-band low noise amplifier with a typical small signal gain of 13 dB and a nominal noise figure of 6.5 dB across the frequency range of 110 to 170 GHz. The DC power requirement for the amplifier is +8 VDC/40 mA. The input and output port configuration offers an inline str

Eravant

D-Band Low Noise Amplifier

SBL-1141743065-0606-E1 is a D-band low noise amplifier with a typical small signal gain of 30 dB and a nominal noise figure of 6.5 dB across the frequency range of 110 to 170 GHz. The DC power requirement for the amplifier is +8 VDC/70 mA. The input and output port configuration offers an inline str

Eravant