Tuner switching circuit

Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for surface mounted ICs, or for printed-circuits w

文件：43.62 Kbytes 页数：6 Pages

PHI

PHI

On/off logic IC

GENERAL DESCRIPTION The SAA1305T is an on/off logic IC, intended for use in car radios to interface between a microcontroller and various input signals such as ignition, low supply detection, on/off key and external control signals. The SAA1305T can replace an existing on/off logic built-up wit

文件：180.97 Kbytes 页数：32 Pages

PANASONIC

松下

Control interface for VHS video recorders

GENERAL DESCRIPTION The SAA1310 provides an interface between the tape control head in the VHS deck-electronics. The circuit also includes an interface between sensors in the deck mechanics and the microprocessor. FEATURES • Full support of VISS and VASS mode (VHS Index/Address Search System)

文件：106.57 Kbytes 页数：15 Pages

PHI

PHI

Control interface for VHS video recorders

GENERAL DESCRIPTION The SAA1310 provides an interface between the tape control head in the VHS deck-electronics. The circuit also includes an interface between sensors in the deck mechanics and the microprocessor. FEATURES • Full support of VISS and VASS mode (VHS Index/Address Search System)

文件：106.57 Kbytes 页数：15 Pages

PHI

PHI

Battery charge level indicator

GENERAL DESCRIPTION The SAA1501T is intended to be used as a battery monitor and charge current control circuit in rechargeable battery systems. FEATURES • High level of integration to allow assembly in intelligent battery packs • Accurate charge and discharge account • Large dynamic range of

文件：372.22 Kbytes 页数：20 Pages

PHI

PHI

Battery charge level indicator

GENERAL DESCRIPTION The SAA1501T is intended to be used as a battery monitor and charge current control circuit in rechargeable battery systems. FEATURES • High level of integration to allow assembly in intelligent battery packs • Accurate charge and discharge account • Large dynamic range of

文件：372.22 Kbytes 页数：20 Pages

PHI

PHI

Safety IC for Li-ion

GENERAL DESCRIPTION The SAA1502ATS is manufactured in a Bipolar, CMOS and DMOS (BCD) Power Logic 70 process and is intended to be used as a protection circuit for single cell Li-ion battery packs. The current and voltage ratings are especially designed for use in battery packs for portable teleph

文件：108.23 Kbytes 页数：20 Pages

PHI

PHI

Safety IC

GENERAL DESCRIPTION The SAA1504T is manufactured in a BCD Power Logic 70 process and is intended to be used as a protection circuit for single cell Li-ion battery packs. The current and voltage ratings are especially designed for use in battery packs for portable telephones such as GSM. FEATURES

文件：80.64 Kbytes 页数：16 Pages

PHI

PHI

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

文件：146.68 Kbytes 页数：2 Pages

SEMIKRON

赛米控丹佛斯

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

文件：146.68 Kbytes 页数：2 Pages

SEMIKRON

赛米控丹佛斯