FDDI fiber optic postamplifier

DESCRIPTION The SA5224 is a high-gain limiting amplifier that is designed to process signals from fiber optic preamplifiers. Capable of operating at 125Mb/s, the chip is FDDI compatible and has input signal level-detection with a user-adjustable threshold. The DATA and LEVEL-DETECT outputs are di

文件：73.5 Kbytes 页数：10 Pages

PHI

PHI

Fiber optic postamplifier

DESCRIPTION The SA5225 is a high-gain limiting amplifier that is designed to process signals from fiber optic preamplifiers. Capable of operating at 125Mb/s, the chip has input signal level-detection with a user-adjustable threshold. The DATA and LEVEL-DETECT outputs are differential for optimum

文件：81.68 Kbytes 页数：10 Pages

PHI

PHI

Fiber optic postamplifier

DESCRIPTION The SA5225 is a high-gain limiting amplifier that is designed to process signals from fiber optic preamplifiers. Capable of operating at 125Mb/s, the chip has input signal level-detection with a user-adjustable threshold. The DATA and LEVEL-DETECT outputs are differential for optimum

文件：81.68 Kbytes 页数：10 Pages

PHI

PHI

Low voltage operational amplifier

DESCRIPTION The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which con

文件：189.93 Kbytes 页数：17 Pages

PHI

PHI

Low voltage operational amplifier

DESCRIPTION The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which con

文件：189.93 Kbytes 页数：17 Pages

PHI

PHI

Low voltage operational amplifier

DESCRIPTION The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which con

文件：189.93 Kbytes 页数：17 Pages

PHI

PHI

Low voltage operational amplifier

DESCRIPTION The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which con

文件：189.93 Kbytes 页数：17 Pages

PHI

PHI

丝印：SA5532A；Package：SOIC；NE5532x, SA5532x Dual Low-Noise Operational Amplifiers

1 Features 1• Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz • Unity-Gain Bandwidth: 10 MHz Typ • Common-Mode Rejection Ratio: 100 dB Typ • High DC Voltage Gain: 100 V/mV Typ input• Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω • High Slew Rate: 9 V/μs

文件：632.58 Kbytes 页数：24 Pages

TI

德州仪器

丝印：SA5532A；Package：SOIC(D)；NE5532x, SA5532x Dual Low-Noise Operational Amplifiers

1 Features 1• Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz • Unity-Gain Bandwidth: 10 MHz Typ • Common-Mode Rejection Ratio: 100 dB Typ • High DC Voltage Gain: 100 V/mV Typ input• Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω • High Slew Rate: 9 V/μs

文件：633.15 Kbytes 页数：24 Pages

TI

德州仪器

丝印：SA5532A；Package：SOIC(D)；NE5532x, SA5532x Dual Low-Noise Operational Amplifiers

1 Features 1• Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz • Unity-Gain Bandwidth: 10 MHz Typ • Common-Mode Rejection Ratio: 100 dB Typ • High DC Voltage Gain: 100 V/mV Typ input• Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω • High Slew Rate: 9 V/μs

文件：633.15 Kbytes 页数：24 Pages

TI

德州仪器