100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

文件：2.17319 Mbytes 页数：5 Pages

ASHCROFT

雅斯科

100/101, 200/201, 300/301 Threaded Diaphragm Seal

FEATURES „ 316L Stainless steel top housing (standard) „ Available in wide range of wetted materials for process compatibility „ Flushing port (101, 201, 301) provides for easy cleaning of process „ Continuous duty design contains process if instrument is inadvertantly removed „ NSF-61 Compli

文件：2.17319 Mbytes 页数：5 Pages

ASHCROFT

雅斯科

PCM FRAME ALIGNER

DESCRIPTION: The SA9101 (Frame Alignment unit for PCM30 Systems) is a C-MOS device which implements the interface to PCM30 Transmission Systems. In the receive direction, the device performs HDB3 decoding, Frame alignment (selectable between doubleframe and CRC-Multiframe) and extraction of

文件：218.13 Kbytes 页数：12 Pages

SAMES

PRESET EQUALIZER CIRCUIT

DESCRIPTION SA2078 is a 3 mode preset equalizer circuit. This IC has built-in one middle boost and two type high/low boost equalizers and flat mode. These operation modes are controlled by internal switch. FEATURES * Dual channel * 3 mode preset equalizer * Few external parts *

文件：96.19 Kbytes 页数：4 Pages

SILAN

士兰微

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts FEATURE ♦ 500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦ Hig

文件：660.35 Kbytes 页数：4 Pages

SY

顺烨电子

TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Zener Voltage Range 5.0 - 170 Volts PPK : 500 Watts FEATURES : * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free

文件：44.46 Kbytes 页数：4 Pages

SYNSEMI

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 5.0 --- 170 V PEAK PULSE POWER: 500 W FEATURES ◇ Plastic package gas Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent c

文件：86.01 Kbytes 页数：4 Pages

BILIN

银河微电

TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * Glass passivated junction * 500 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time

文件：792.46 Kbytes 页数：4 Pages

DCCOM

道全

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

文件：169.1 Kbytes 页数：6 Pages

PANJIT

強茂

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE POWER 5.0 to 220 Volts 500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time:

文件：110.22 Kbytes 页数：4 Pages

PANJIT

強茂