128 Mbit (16 Mbyte)/256 Mbit (32 Mbyte) 128 Mbit (16 Mbyte)/256 Mbit (32 Mbyte)

Features  CMOS 3.0 Volt Core with Versatile I/O  Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – Extended Addressing: 24- or 32-bit address options – Serial Command set and footprint compatible with S25FL-A, S2

文件：4.64762 Mbytes 页数：149 Pages

CypressCypress Semiconductor

赛普拉斯赛普拉斯半导体公司

128 Mbit (16 Mbyte)/256 Mbit (32 Mbyte) 128 Mbit (16 Mbyte)/256 Mbit (32 Mbyte)

Features  CMOS 3.0 Volt Core with Versatile I/O  Serial Peripheral Interface (SPI) with Multi-I/O – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – Extended Addressing: 24- or 32-bit address options – Serial Command set and footprint compatible with S25FL-A, S2

文件：4.64762 Mbytes 页数：149 Pages

CypressCypress Semiconductor

赛普拉斯赛普拉斯半导体公司

128-Mbit CMOS 3.0 Volt Flash Memory with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus

Architectural Advantages  Single power supply operation – Full voltage range: 2.7 to 3.6V read and write operations  Memory architecture – Uniform 4 kB sectors – 256-byte page size  Program – Page Program (up to 256 bytes) in 0.7 ms (typical) – Progra

文件：2.77776 Mbytes 页数：59 Pages

spansion

飞索

256Mbit (32Mbyte)/128Mbit (16Mbyte),3.0 V FL-L Flash Memory

文件：1.28354 Mbytes 页数：158 Pages

CypressCypress Semiconductor

赛普拉斯赛普拉斯半导体公司

128 Megabit CMOS 3.0 Volt Flash Memory with 104-MHz SPI (Serial Peripheral Interface) Bus

General Description The S25FL128P is a 3.0 Volt (2.7V to 3.6V), single-power-supply Flash memory device. The device consists of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory. The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The device

文件：2.03526 Mbytes 页数：48 Pages

spansion

飞索