RTL8251CN数据手册Realtek中文资料规格书

描述 Description

The Realtek RTL8251CN-VB-GR is a highly integrated Ethernet transceiver that complies with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. It provides all the necessary physical layer functions to transmit and receive Ethernet packets over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable.
The RTL8251CN-VB uses state-of-the-art DSP technology and an Analog Front End (AFE) to enable high-speed data transmission and reception over UTP cable. Functions such as Crossover Detection & Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented in the RTL8251CN-VB to provide robust transmission and reception capabilities at 10Mbps, 100Mbps, or 1000Mbps.
Data transfer between MAC and PHY is via the Reduced Gigabit Media Independent Interface (RGMII) for 1000Base-T, 10Base-T, and 100Base-TX.
 

特性 Features

1000Base-T IEEE 802.3ab Compliant
100Base-TX IEEE 802.3u Compliant
10Base-T IEEE 802.3 Compliant
IEEE 802.3 Compliant RGMII
Supports Auto-Negotiation
Supports Parallel Detection
Crossover Detection & Auto-Correction
Automatic polarity correction
Transmit wave-shaping
DSP processing
Internal hybrids for 1000Base-T
Baseline Wander Correction
Support Interrupt function
Supports half/full duplex operation
Transmission rate up to 1Gbps over industry standard CAT.5 UTP cable with BER less than 10-10 in 1000Base-T
The design transceiver capability target is up to 120M for CAT.5 cable in 1000Base-T
Supports 3.3V or 2.5V signaling for RGMII
Supports 25MHz external crystal or OSC
Provides 125MHz clock source for MAC
Provides 2 network status LEDs
Supports Link Down power saving
Built-in switching regulator
48-pin QFN
0.11µm process with very low power consumption