Quad-port integrated 10/100/1000Base-T Gigabit Ethernet transceiver

General Description The RTL8214C integrates quad independent 10/100/1000M Ethernet transceivers into a single IC, and performs all the physical layer (PHY) functions for 1000Base-T, 100Base-TX, and 10Base-T Ethernet on category 5 UTP cable except 1000Base-T half-duplex. 10Base-T functionality c

文件：120.95 Kbytes 页数：4 Pages

REALTEK

瑞昱

Quad-port integrated 10/100/1000Base-T Gigabit Ethernet transceiver

General Description The RTL8214C integrates quad independent 10/100/1000M Ethernet transceivers into a single IC, and performs all the physical layer (PHY) functions for 1000Base-T, 100Base-TX, and 10Base-T Ethernet on category 5 UTP cable except 1000Base-T half-duplex. 10Base-T functionality c

文件：120.95 Kbytes 页数：4 Pages

REALTEK

瑞昱

INTEGRATED QUAD 10/100/1000M ETHERNET TRANSCEIVER

The RTL8214C integrates quad independent 10/100/1000M Ethernet transceivers into a single IC, and performs all the physical layer (PHY) functions for 1000Base-T, 100Base-TX, and 10Base-T Ethernet on category 5 UTP cable except 1000Base-T half-duplex. 10Base-T functionality can also be achieved on st • Quad-port integrated 10/100/1000M Ethernet transceiver\n• Each port supports full duplex in 10/100/1000M mode (half duplex is only supported in 10/100M mode)\n• Supports QSGMII (5Gbps serial high speed interface) in 10/100/1000M mode\n• Supports IEEE 802.3az Energy Efficient Ethernet (EEE);

Realtek

瑞昱

INTEGRATED 10/100/1000 QUAD GIGABIT ETHERNET TRANSCEIVER

The RTL8214C integrates quad independent 10/100/1000M Ethernet transceivers into a single IC, and performs all the physical layer (PHY) functions for 1000Base-T, 100Base-TX, and 10Base-T Ethernet on category 5 UTP cable except 1000Base-T half-duplex. 10Base-T functionality can also be achieved on st • Quad-port integrated 10/100/1000Base-T Gigabit Ethernet transceiver\n• Each port supports full duplex in 10/100/1000M mode (half duplex is only supported in 10/100M mode)\n• Supports RSGMII-Plus (5Gbps serial high speed interface) in 10/100/1000 mode\n• Supports QSGMII (5Gbps serial high speed int;

Realtek

瑞昱

QSGMII to Quad 1000Base-X/100FX Transceiver

The Realtek RTL8214QF is used to convert QSGMII Serdes interfaces to four 1000Base-X/100FX ports. IEEE802.3 Clause 22 MIIM formats are supported thus Switch controller can access the related register to get status and configure them. • 5Gbps QSGMII to x4 1Gbps 100FX/1000Base-X conversion\n• 5Gbps QSGMII to x4 SGMII conversion.;

Realtek

瑞昱