RT7791P中文资料立锜科技数据手册PDF规格书

General Description

The RT7791P series is specifically designed to work

with controllers, such as the RT7202, so as to provide a

total solution for the USB PD or a programmable power

adapter. The RT7791P can achieve high efficiency,

meet safety standards, and consume less than 50mW

of power in a 5V standby condition.

The RT7791P possesses several innovations in

system control, by which the RT7791P can therefore

allow one to design a power a solution with a wide

range of output voltage. One of the innovations is by

using the DMAG pin, the RT7791P senses output

voltage to adjust loop gain for system stability, to adjust

output over-voltage protection threshold voltage for

external devices protection, and to adjust current limit

for Limited Power Source (LPS) safety requirements.

The RT7791P is also equipped with comprehensive

protection features, including Bulk-Capacitor brown-in

brown-out protection, VDD over-voltage protection

VDD OVP), output over-voltage/under-voltage

protection (Output OVP/UVP), secondary rectifier

short-circuit protection (SRSP), and external

over-temperature protection (External OTP). In case

for constant output power regulation, a resistor

connected to CS pin can be used to achieve accurate

line compensation across the universal input voltage

range. Moreover the RT7791P moreover provides

various features to protect against failures occurring at

the secondary-side component, such as the RT7202 or

a shunt regulator.

In applications, the RT7791P is suggested to use with

a Secondary controller RT7202 to realize a robust and

safe design, especially to prevent the potential fault

scenarios, due to the mis-connection of various devices,

cables, plugs and receptacles.

特性 Features

 Optimized for Adaptive Output Power

 Integrated Low-Dropout Regulator (LDO)

 Wide VDD Range : 10V to 40V

 Adaptive Over-Current Protection

 Adaptive Loop Gain Control for Loop Stability

 High Efficiency

 Green Mode Operation at Light Load or No

Load

 Comprehensive Protection Features

 Bulk-Capacitor Brown-In and Brown-Out

Protection

 OTP Pin for External Over-Temperature

Protection

 VDD Over-Voltage Protection

 Output Over-Voltage and Under-Voltage

Protection

 Secondary Rectifier Short-Circuit Protection

 Programmable Line Compensation

 Others

 < 50mW in 5V Standby Mode for Power Saving

 Driver Capability : 300mA/300mA

 SmartJitterTM Technology

Applications

 USB PD and Programmable Power Adapters