RP112中文资料低噪声150mA LDO稳压器数据手册Nisshinbo规格书

描述 Description

The RP112 Series are CMOS-based LDO regulators featuring 150mA output current. The RP112 features ultra low noise and its Ripple Rejection is as low as 80dB at f=1kHz, 75dB at f=10kHz and 65dB at f=100kHz. The Output Noise is also as low as Typ. 10µVrms. It is kept the low level at any output voltage. RP112 is suitable for the power source for the portable music player and RF module that demands for higher level of noise reduction. SOT-23-5 and SC-88A packages, a 1mm square DFN(PLP)1010-4 package are available.

特性 Features

ultra low noise and its Ripple Rejection is as low as 80dB at f=1kHz, 75dB at f=10kHz and 65dB at f=100kHz. The Output Noise is also as low as Typ. 10µVrms. It is kept the low level at any output voltage. RP112 is suitable for the power source for the portable music player and RF module that demands for higher level of noise reduction. SOT-23-5 and SC-88A packages, a 1mm square DFN(PLP)1010-4 package are available.FEATURES
• Input Voltage Range (Absolute maximum rating)：2.0 V to 5.25 V (6.0V)；
• Supply Current：Typ. 75 µA；
• Standby Current：Typ. 0.1 µA；
• Output Voltage Range：1.2 V to 4.8 V (0.1V steps)；
• Dropout Voltage：Typ. 0.20 V (IOUT=150mA, VOUT=2.8V)；
• Ripple Rejection：Typ. 80 dB (f=1kHz),Typ. 75 dB (f=10kHz),Typ. 65 dB (f=100kHz)；
• Output Voltage Accuracy：±1.0%；
• Output Voltage Temperature Coefficient：Typ. ±30 ppm/°C；
• Line Regulation：Typ. 0.02%/V；
• Packages：DFN(PLP)1010-4, SC-88A, SOT-23-5；
• Short Current Limit：Typ. 40 mA；
• Protection Function：Built-in Foldback Protection Circuit；
• Output Noise：Typ. 10 µVrms；
• Ceramic capacitors are recommended to be used with this IC：1.0 µF or more；

应用 Application

• Power source for portable communication equipment
• Power source for electrical appliances such as cameras, VCRs and camcorders
• Power source for battery-powered equipments
• Power source for electrical home appliances
• Power source for the portable music player
• Power source for RF module

简介

RP112属于集成电路（IC）的稳压器-线性。由制造生产的RP112稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。