RP103N331D集成电路（IC）的线性+开关稳压器规格书PDF中文资料

OUTLINE

The RP103 Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.

These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP103 Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.

The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are PLP1010-4, SOT23-5, SC82-AB, therefore high density mounting of the ICs on boards is possible.

FEATURES

• Low Supply Current..............................................................TYP. 36µA

• Standby Mode ......................................................................TYP. 0.1µA

• Low Dropout Voltage ............................................................TYP. 0.210V (IOUT=150mA, 2.8V Output type)

• High Ripple Rejection...........................................................TYP. 75dB (f=1kHz)

• Low Temperature-Drift Coefficient of Output Voltage.........TYP. ±30ppm/°C

• Excellent Line Regulation.....................................................TYP. 0.02/V

• High Output Voltage Accuracy..............................................±1.0

• Small Packages ..................................................................PLP1010-4, SOT-23-5, SC-82AB

• Output Voltage......................................................................1.2V, 1.3V, 1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.5V,

2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V, 3.3V

• Built-in Fold Back Protection Circuit.....................................TYP. 40mA (Current at short mode)

• Ceramic capacitors are recommended to be used with this IC...........CIN=COUT=0.47µF or more

APPLICATIONS

• Power source for portable communication equipment.

• Power source for electrical appliances such as cameras, VCRs and camcorders.

• Power source for battery-powered equipment.