RP100N211B中文资料理光数据手册PDF规格书

OUTLINE

The RP100x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.

These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP100x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.

The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and PLP1612-4, therefore high density mounting of the ICs on boards is possible.

FEATURES

• Supply Current ........................................Typ. 18µA

• Standby Current ......................................Typ. 0.1µA

• Dropout Voltage ......................................Typ. 0.13V (IOUT=150mA, VOUT=2.8V)

• Ripple Rejection.......................................Typ. 75dB (f=1kHz)

• Temperature-Drift Coefficient of Output Voltage ...Typ. ±30ppm/°C

• Line Regulation ........................................Typ. 0.02/V

• Output Voltage Accuracy...........................±0.8

• Packages ..................................................PLP1612-4, SOT-23-5

• Input Voltage Range .................................1.7V to 5.25V

• Output Voltage ..........................................1.2V, 1.3V, 1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.1V, 2.5V,

2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V, 3.3V

• Built-in Fold Back Protection Circuit .....................Typ. 40mA (Current at short mode)

• Ceramic capacitors are recommended to be used with this IC .....1.0µF or more

APPLICATIONS

• Power source for portable communication equipment.

• Power source for electrical appliances such as cameras, VCRs and camcorders.

• Power source for battery-powered equipment.