RP100中文资料低噪声0.6%精度200mA LDO稳压器数据手册Nisshinbo规格书

描述 Description

The RP100 Series are CMOS-based LDO regulators featuring 200mA output. RP100 features supply current as low as 18µA, which is far lower than existing lines. Due to a built-in 0.87Ω (at VSET=2.8V) on-resistor, RP100 can provide a low dropout voltage. RP100 also features an excellent line transient response, ripple rejection at 75dB, and low noise. The output voltage accuracy is as high as ± 0.6% and the temperature drift coefficient of output voltage is low at ± 30ppm/°C.

特性 Features

supply current as low as 18µA, which is far lower than existing lines. Due to a built-in 0.87Ω (at VSET=2.8V) on-resistor, RP100 can provide a low dropout voltage. RP100 also features an excellent line transient response, ripple rejection at 75dB, and low noise. The output voltage accuracy is as high as ± 0.6% and the temperature drift coefficient of output voltage is low at ± 30ppm/°C.FEATURES
• Input Voltage Range (Absolute maximum rating)：1.7 V to 5.25 V (6.0 V)；
• Supply Current：Typ. 18 µA；
• Standby Current：Typ. 0.1 µA；
• Dropout Voltage：Typ. 0.13 V (IOUT=150mA, VOUT=2.8V)；
• Ripple Rejection：Typ. 75 dB (f=1kHz)；
• Temperature-Drift Coefficient of Output Voltage：Typ. ±30 ppm/°C；
• Line Regulation：Typ. 0.02%/V；
• Output Voltage Accuracy：±0.6%；
• Packages：DFN(PLP)1612-4, SOT-23-5；
• Output Voltage Range：1.2 V to 3.3 V (0.1V steps)；
• Built-in Fold Back Protection Circuit：Typ. 40 mA (Current at short mode)；
• Ceramic capacitors are recommended to be used with this IC：1.0 µF or more；

简介

RP100属于集成电路（IC）的稳压器-线性。由制造生产的RP100稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。