RL9958数据手册ST中文资料规格书

描述 Description

The RL9958 is an SPI controlled H-Bridge, designed for the control of DC and stepper motors in safety critical applications and under extreme environmental conditions.
The H-Bridge is protected against over temperature, short circuits and has an undervoltage lockout for all the supply voltages Vsand Vdd, and for overvoltage on Vdd. All malfunctions cause the output stages to go tristate.
Detailed failure diagnostics on each channel is provided via SPI: short circuit to battery, short circuit to ground, short circuit overload, over temperature.
Open-load can be detected in ON condition, for the widest application ranges. Current regulation threshold can be set by SPI from 2.5 A to 8.6 A (Typ.), in 4 steps. Guaranteed accuracy is ±10 % on all temp range, using an external reference resistor with 1% accuracy over all temp range.
Current limitation threshold is linearly reduced by temperature over 165 °C.and a thermal warning bit is set by SPI. The H-Bridge contains integrated free-wheel diodes. In case of free-wheeling condition, the low side transistor is switched on in parallel of its diode to reduce power dissipation.
A multiple wire bonding technique, as well as ST proprietary package design is making RL9958 compatible with several power packages, for maximum flexibility:
PowerSO-20 package (medium power, JEDEC standard MO166.

特性 Features

Programmable current regulation peak threshold by SPI up to 8.6 A typ.
Operating battery supply voltage 4.0 V to 28 V
Operating V
dd supply voltage 4.5 V to 5.5 V
All pins withstand 19 V, Vs and output pins withstand 40 V
Full path R
onfrom 100 mΩ (at T
j = -40 °C) to 300 mΩ (at T
j=150 °C)
Logic inputs TTL/CMOS-compatible
Operating frequency up to 20 kHz
16-bit SPI interface for configuration/diagnostics, daisy chain capability
Over temperature and short circuit protection
V
Sundervoltage disable function
V
ddundervoltage and overvoltage protection
V
ddovervoltage detection
Open-load detection in ON condition
Full diagnostics in OFF state
Enable and disable input
Low stand by current (<10 μA)
Voltage and current slew-rate control for low EMI, programmable through SPI
Aerospace and Defense featuresDedicated traceability and part marking
Production parts approval documents available
Adapted Extended life time and obsolescence management
Extended Product Change Notification process
Designed and manufactured to meet sub ppm quality goals
Advanced mold and frame designs for Superior resilience to harsh environment (acceleration, EMI, thermal, humidity)
Single Fabrication, Assembly and Test site
Dual internal production source capability