RHFL6000LAKP02V中文资料意法半导体数据手册PDF规格书

特性 Features

• Input voltage range from 2.5 V to 12 V

• Adjustable output voltage from 0.6 V to 9 V

• 2 A guaranteed output current

• Low dropout voltage: 0.3 V typ. @ 0.4 A

• Embedded overtemperature and overcurrent protection

• Adjustable overcurrent limitation

• Output overload monitoring/signalling

• Internal control loop accessible via an external pin, optional, providing flexibility

for stability margin tuning

• Inhibit (ON/OFF) TTL compatible control

• Programmable output short-circuit current

• Remote sensing operation

• Rad-hard: guaranteed up to 300 krad MIL-STD-883J method 1019.9 high dose

rate and 0.01 rad/s in ELDRS conditions

• Radiation environment: SET/SEL/SEB:

- SEL free @ LET=120 MeV/cm²/mg

- SET: less than 3.3 of VOUT@ 120 MeV

• Heavy-ions SET dedicated internal circuitry implemented for absorbing output

transient

• Operating junction temperature range: -55 °C to 125 °C

描述 Description

The RHFL6000L high-performance adjustable positive voltage regulator provides

exceptional radiation performance. It is tested in accordance with MIL-STD-883J

method 1019.9, in ELDRS conditions. The device is available in the Flat-16P, a

hermetic ceramic package. A dedicated internal circuitry is implemented to absorb

output transients during SET events. The operating input voltage goes from 2.5 V to

12 V.

The RHFL6000L is an upgraded version of the RHFL6000A and is intended to

extend the range of the regulated output voltages down to 0.6 V.