Adjustable 2.8A Single Resistor Low Dropout Regulator

The RH3083 is a 2.8A low dropout linear regulator with a unique architecture featuring a precision current source and voltage follower which allows the output to be programmed to any voltage between zero and 18V. Multiple regulators can be paralleled to increase total output current and spread heat • Outputs May Be Paralleled for Higher Current and Heat Spreading •Single Resistor Sets Output Voltage •Output Adjustable to 0V •50μA SET Pin Current: 1% Initial Accuracy\n• Total Ionizing Dose (TID) Tolerance, per TM1019.8, MIL-STD-883 Up to:\n• 100kRad (Si), per Condition D at 10mRads (Si)/sec;

ADI

亚德诺

Adjustable 2.8A Single Resistor Low Dropout Regulator

文件：248.97 Kbytes 页数：6 Pages

LINER

凌力尔特

Adjustable 2.8A Single Resistor Low Dropout Regulator

文件：248.97 Kbytes 页数：6 Pages

LINER

凌力尔特

Adjustable 2.8A Single Resistor Low Dropout Regulator

The RH3083 is a 2.8A low dropout linear regulator with a unique architecture featuring a precision current source and voltage follower which allows the output to be programmed to any voltage between zero and 18V. Multiple regulators can be paralleled to increase total output current and spread heat • Processed in Compliance with our certified MIL-PRF-38535 Class V Flow\n• Wide Input Range: 1.2V to 23V\n• Output Current: 2.8A\n• Low Dropout Voltage: 310mV\n• Output Adjustable to 0V\n• 50μA Set Pin, ±2% Accurate to 200kRad TID\n• Stable with 10μF Ceramic Output Capacitor\n• Current Limit and;

ADI

亚德诺