RFFM4551数据手册Qorvo中文资料规格书

描述 Description

The RFFM4551 provides a complete integrated solution in a single front end module (FEM) for Wi-Fi 802.11a/n/ac systems. The ultra-small factor and integrated matching minimizes layout area in the customer's application and greatly reduces the number of external components. Performance is focused on linear output power under a number of conditions including duty cycle and packet length while balancing power consumption needs of leading edge device platforms. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost.
The RFFM4551 integrates a 5GHz power amplifier (PA), single pole two throw switch (SP2T) and an LNA with bypass. Also this FEM includes integrated 2nd and 3rd Harmonic filters and integrated out of band rejection filters. The device is provided in a 3.0mm x 3.0mm x 1.0mm, 16-pin laminate package. This module meets or exceeds the RF front end needs of IEEE 802.11a/n/ac Wi-Fi RF systems.

特性 Features

• 3.3V Operation
• POUT = +17.0dBm at 3.3V, 802.11ac MCS9 HT80 at 1.8% Dynamic EVM Compliance
• POUT = +18.0dBm at 3.3V, 802.11n MCS7 HT20/40 at 3.0% Dynamic EVM Compliance
• POUT = +19.0dBm at 3.3V, MCS0 HT20, HT40, and HT80 at Spectral Mask Compliance
• Integrated 2nd and 3rd Harmonic filters & Integrated out of band rejection filters.
• Integrated RX notch filter @ 2.5GHz for DBDC operation.
• Integrated 5GHz PA, SP2T, LNA with Bypass and Power Detector Coupler.