REF6041集成电路（IC）的电压基准规格书PDF中文资料

REF6041属于集成电路（IC）的电压基准。由德州仪器制造生产的REF6041电压基准产品属于基准电压源系列，可通过相对较不稳定的电源提供稳定的电势，电压值始终保持恒定，以便在测量、控制和类似应用中用作比较的标准。其功能行为可能与用于大功率调节的线性稳压器相似，但基准电压源器件却不适合用于此类用途。用作比较标准时，若输出电流容量或实际负载电流增大，其性能通常会降低。

1 Features

1• Excellent Temperature Drift Performance

– 5 ppm/°C (max) from –40°C to +125°C

• Extremely Low Noise

– Total Noise: 5 μVRMS With 47-μF Capacitor

– 1/f Noise (0.1 Hz to 10 Hz): 3 μVPP/V

• Integrated ADC Drive Buffer

– Low Output Impedance: < 50 mΩ (0-200 kHz)

– First Sample Precise to 18 Bits With ADS8881

– Enables Burst-Mode DAQ Systems

• Low Supply Current: 820 μA

• Low Shutdown Current: 1 μA

• High Initial Accuracy: ±0.05%

• Very-Low Noise and Distortion

– SNR: 100.5 dB, THD: –125 dB (ADS8881)

– SNR: 106 dB, THD: –120 dB (ADS127L01)

• Output Current Drive: ±4 mA

• Programmable Short-Circuit Current

• Verified to Drive REF Pin of ADS88xx family of

SAR ADCs and ADS127xx family of Wideband ΔΣ

ADCs

2 Applications

• ATE Testers and Oscilloscopes

• Test and Measurement Equipment

• Analog Input Modules for PLCs

• Medical Equipment

• Precision Data Acquisition Systems

3 Description

The REF6000 family of voltage references have an

integrated low output impedance buffer that enable

the user to directly drive the REF pin of precision

data converters, while preserving linearity, distortion,

and noise performance. Most precision SAR and

Delta-Sigma ADCs, switch binary-weighted capacitors

onto the REF pin during the conversion process. In

order to support this dynamic load the output of the

voltage reference must be buffered with a low-output

impedance (high-bandwidth) buffer. The REF6000

family devices are well suited, but not limited, to drive

the REF pin of the ADS88xx family of SAR ADCs,

and ADS127xx family of delta-sigma ADCs, as well

as other digital-to-analog converters (DACs).

The REF6000 family of voltage references are able to

maintain an output voltage within 1LSB (18-bit) with

minimal droop, even during the first conversion while

driving the REF pin of the ADS8881. This feature is

useful in burst-mode, event-triggered, equivalent-time

sampling, and variable-sampling-rate data-acquisition

systems. The REF60xx variants of REF6000 family

specify a maximum temperature drift of just 5 ppm/°C

and initial accuracy of 0.05% for both the voltage

reference and the low output impedance buffer

combined. For various temperature drift options in

REF6000 family, see the Device Comparison Table.