Turbine flow meter

文件：911.81 Kbytes 页数：9 Pages

HYDROTECHNIK

High Isolation DPDT Transfer Switch

The QM11022A is a dual-pole double-throw transfer switch designed for general purpose switching applications where RF port transfer (port swapping) control is needed. The low insertion loss along with excellent linearity performance makes the QM11022A ideal for multi-mode GSM, EDGE, UMTS, and LTE ha • Low Insertion Loss\n• High Port-to-Port Isolation\n• GPIO Interface for 1.3 V to 2.7 V Control Logic\n• Broadband Performance Suitable for All Cellular Modulation Schemes up to 8.25 GHz\n• Very Low Current Consumption\n• Linearity and Harmonic Performance Ideally Suited for LTE Applications\n• DC ;

Qorvo

威讯联合

Broadband High Linearity DP4T Routing Switch

The QM11024 is a low loss, high linearity dual-pole four-throw addressable switch with performance optimized for transfer routing applications. The QM11024 integrates a serial control system compatible with the RFFE standard. The select lines (SID) provide USID addressability and up to two placement • Excellent Insertion Loss and Isolation performance\n• High Linearity\n• RFFE 2.1 Control Interface• UDR Mask write capable (R/WM);

Qorvo

威讯联合

Three Pole Three Throw Antenna Routing Switch

• Excellent Insertion Loss and Isolation Performance\n• RFFE 2.1 Comntrol Interface with HW Masked Writes\n• Slave ID for Multiplacement on same Board\n• DC Blocking Capictors are Not Requried for Typical Applications;

Qorvo

威讯联合