PQ CORES

文件：103.1 Kbytes 页数：3 Pages

YUXIANG

丝印：PQ2585X；Package：VQFN；BQ25856-Q1: Automotive, Standalone/I2C Controlled, 1- to 14-Cell Bidirectional Buck- Boost Battery Charge Controller

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: −40ºC ≤ TA≤ 150ºC • Wide input voltage operating range: 4.2V to 70V • Wide battery voltage operating range: up-to 70V with multi-chemistry support: – 1- to 14-cell Li-ion charge profile – 1- to 16-cell LiFePO

文件：1.98643 Mbytes 页数：76 Pages

TI

德州仪器

丝印：PQ25882；Package：DSBGA；I2C Controlled, 2-Cell, 2-A Boost-Mode Battery Charger for USB Input

文件：203.81 Kbytes 页数：8 Pages

TI

德州仪器

丝印：PQ25882；Package：DSBGA；I2C Controlled, 2-Cell, 2-A Boost-Mode Battery Charger for USB Input

文件：204.56 Kbytes 页数：9 Pages

TI

德州仪器

丝印：P181；Package：WSON；BQ25181 I2C Controlled, 1-Cell, 1-A Linear Battery Charger with Power Path and Ship Mode

1 Features • 1-A Power path linear battery charger – 3.0-V to 5.9-V input voltage operating range – 25-V tolerant input voltage – Configurable battery regulation voltage with 0.5 accuracy from 3.6 V to 4.65 V in 10-mV steps – 5-mA to 1-A configurable fast charge current – 110-mΩ battery FE

文件：1.70892 Mbytes 页数：43 Pages

TI

德州仪器

BQ25186 1-Cell, 1-A I2C Linear Battery Charger with Power Path, Ship Mode, Shutdown Mode, and Battery Tracking VINDPM

1 Features • 1-A linear battery charger – 3.0V to 18V input voltage operating range optimized for battery-to-battery charging and USB adapters – 25V tolerant input voltage – Configurable battery regulation voltage with 0.5 accuracy from 3.6V to 4.65V in 10mV steps – Li-ion, Li-Poly, and L

文件：1.47435 Mbytes 页数：50 Pages

TI

德州仪器

BQ25630 I2C Controlled Single Cell 5A Buck Charger with USB-C Detection

1 Features • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery – >90% efficiency down to 10mA output current from 5V input – Charge current up to 5A in 20mA steps – Charge termination from 30 to 1000mA in 10mA steps – Flexible JEITA profile for sa

文件：723.51 Kbytes 页数：11 Pages

TI

德州仪器

BQ25630 I2C Controlled Single Cell 5A Buck Charger with USB-C Detection

1 Features • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery – >90% efficiency down to 10mA output current from 5V input – Charge current up to 5A in 20mA steps – Charge termination from 30 to 1000mA in 10mA steps – Flexible JEITA profile for sa

文件：723.51 Kbytes 页数：11 Pages

TI

德州仪器

BQ25630 I2C Controlled Single Cell 5A Buck Charger with USB-C Detection

1 Features • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery – >90% efficiency down to 10mA output current from 5V input – Charge current up to 5A in 20mA steps – Charge termination from 30 to 1000mA in 10mA steps – Flexible JEITA profile for sa

文件：723.51 Kbytes 页数：11 Pages

TI

德州仪器

BQ25638 I2C Controlled, 5-A, Maximum 18-V Input, Charger with NVDC Power Path Management and USB OTG Boost Output

1 Features • High-efficiency 5-A, 1.5-MHz, synchronous switch mode buck charger for single cell battery – >90 efficiency down to 10-mA output current from 5-V input – Charge current up to 5 A in 80-mA steps – Charge termination from 30 to 1000 mA in 10- mA steps – Flexible JEITA profile fo

文件：776.18 Kbytes 页数：12 Pages

TI

德州仪器